Tudor

Tudor TX2253 · Truck battery 12V 225Ah 1,150A

Reference: BOL-TUDOR-TX2253 · EAN 3661024056632

The Tudor TX2253 is a truck battery (EFB) with 12 V, 225 Ah and 1,150 A cold cranking current, measuring 518 × 274 × 240 mm.

Where the Tudor TX2253 fits

The Tudor TX2253 is a starter battery for trucks, tractors and machinery: high capacity, robust terminals and a build that withstands vibration and the starts of large engines. It is built to resist constant vibration and long shifts.

The TX2253 belongs to the Tudor TUDOR SUPER HEAVY DUTY EFB range. See all Tudor batteries

EFB technology in the TX2253

The TX2253 is an EFB: flooded lead-acid with reinforced plates and separators for Start-Stop. It can be replaced by an AGM, but an AGM must never be replaced by an EFB.

Tudor TX2253 vs TE2353 and TX1803: which one to choose?

Torn between the TX2253 and another similar Tudor? This is what changes:

ModelCapacityCold cranking (EN)Dimensions (mm)Weight
Tudor TX2253 (this one)225 Ah1,150 A518 × 274 × 24060.1 kg
Tudor TE2353235 Ah1,200 A518 × 274 × 24058.2 kg
Tudor TX1803180 Ah1,000 A513 × 223 × 22346.1 kg
  • Tudor TE2353: 10 Ah more, 50 A more cranking power, the same dimensions.
  • Tudor TX1803: 45 Ah less, 150 A less cranking power, a different case (513 × 223 × 223 mm).

Equivalents and alternatives to the Tudor TX2253

As the TX2253 is an EFB, only EFB or AGM batteries of the same size and polarity are listed: you can step up to AGM, but not down to a conventional battery.

ModelTechnologyCapacityCold cranking (EN)Dimensions (mm)
Fulmen FX2253EFB225 Ah1,150 A518 × 274 × 240
Deta DX2253EFB225 Ah1,150 A518 × 274 × 240
Exide EX2253EFB225 Ah1,100 A518 × 274 × 240
Exide EE2353EFB235 Ah1,200 A518 × 274 × 240
Fulmen FE2353EFB235 Ah1,200 A518 × 274 × 240
Deta DE2353EFB235 Ah1,200 A518 × 274 × 240

Part numbers and codes for the Tudor TX2253

The TX2253 is listed under these codes on labels, in garages and in catalogues:

Commercial referenceTX2253
EAN3661024056632
Not to be confused withTudor TG2253 (225 Ah, 1,200 A)

Before ordering the TX2253, check this

  • The TX2253 delivers 1,150 A cold cranking (EN standard); do not go below what your original battery states.
  • With 225 Ah, the TX2253 replaces an original battery of that capacity or slightly less.
  • Measure the space: the TX2253 takes up 518 × 274 × 240 mm.

Frequently asked questions about the Tudor TX2253

TX2253 or TE2353: which one suits me?

Compared with the TX2253, the Tudor TE2353 has 10 Ah more and 50 A more cranking power. If your current battery says 1,200 A or more, choose the TE2353; if it says 1,150 A or less, the TX2253 is enough. Both measure 518 × 274 × 240 mm, so they fit the same tray.

How much does the Tudor TX2253 weigh?

60.1 kg, with 225 Ah of capacity. For reference, the Tudor TE2353 (235 Ah) weighs 58.2 kg.

Which battery is equivalent to the Tudor TX2253?

In EFB or AGM, with its dimensions and polarity: Fulmen FX2253, Deta DX2253 and Exide EX2253. A conventional battery does not replace the TX2253.

Which charger does the Tudor TX2253 need?

An automatic charger with a lead-acid or EFB mode. Modern chargers recognise it like a conventional battery; avoid old ones without voltage control.

Keep comparing: alternatives to the TX2253

Reviews

This product has no reviews yet. If you own it, tell us how it has gone: it will help whoever is looking at it now.

Loading...
Back to top