Tudor

Tudor TE2353 · Truck battery 12V 235Ah 1,200A

Reference: BOL-TUDOR-TE2353 · EAN 3661024056694

Tudor TE2353: truck battery (EFB) with 12 V, 235 Ah and 1,200 A cold cranking current, measuring 518 × 274 × 240 mm.

Where the Tudor TE2353 fits

The Tudor TE2353 is a starter battery for trucks, tractors and machinery: high capacity, robust terminals and a build that withstands vibration and the starts of large engines. With 235 Ah, the TE2353 suits heavy vehicles that had a battery of that capacity.

The TE2353 belongs to the Tudor TUDOR STRONG PRO (HVR) range. The full range of Tudor batteries

Equivalents and alternatives to the Tudor TE2353

As the TE2353 is an EFB, only EFB or AGM batteries of the same size and polarity are listed: you can step up to AGM, but not down to a conventional battery.

ModelTechnologyCapacityCold cranking (EN)Dimensions (mm)
Exide EE2353EFB235 Ah1,200 A518 × 274 × 240
Fulmen FE2353EFB235 Ah1,200 A518 × 274 × 240
Deta DE2353EFB235 Ah1,200 A518 × 274 × 240
Fulmen FX2253EFB225 Ah1,150 A518 × 274 × 240
Deta DX2253EFB225 Ah1,150 A518 × 274 × 240
Exide EX2253EFB225 Ah1,100 A518 × 274 × 240

Tudor TE2353 vs TX2253 and TE1853

What sets the TE2353 apart from its neighbours in the Tudor range:

ModelCapacityCold cranking (EN)Dimensions (mm)Weight
Tudor TE2353 (this one)235 Ah1,200 A518 × 274 × 24058.2 kg
Tudor TX2253225 Ah1,150 A518 × 274 × 24060.1 kg
Tudor TE1853185 Ah1,100 A513 × 223 × 22346.4 kg
  • Tudor TX2253: 10 Ah less, 50 A less cranking power, the same dimensions.
  • Tudor TE1853: 50 Ah less, 100 A less cranking power, a different case (513 × 223 × 223 mm).

EFB technology in the TE2353

The TE2353 is an EFB: flooded lead-acid with reinforced plates and separators for Start-Stop. It can be replaced by an AGM, but an AGM must never be replaced by an EFB.

Check this before ordering the Tudor TE2353

  • Length, width and height of the TE2353: 518 × 274 × 240 mm.
  • With 235 Ah, the TE2353 replaces an original battery of that capacity or slightly less.
  • The TE2353 delivers 1,200 A cold cranking (EN standard); do not go below what your original battery states.

Part numbers and codes for the Tudor TE2353

The TE2353 is listed under these codes on labels, in garages and in catalogues:

Commercial referenceTE2353
EAN3661024056694
Not to be confused withTudor TF2353 (235 Ah, 1,300 A), Tudor TF2353+ (235 Ah, 1,300 A)

Frequently asked questions about the Tudor TE2353

TE2353 or TX2253: which one suits me?

Compared with the TE2353, the Tudor TX2253 has 10 Ah less and 50 A less cranking power. The TE2353 cranks harder; the TX2253 is only a good option if your original battery says 1,150 A or less. Both measure 518 × 274 × 240 mm, so they fit the same tray.

How much does the Tudor TE2353 weigh?

58.2 kg, with 235 Ah of capacity. For reference, the Tudor TX2253 (225 Ah) weighs 60.1 kg.

Which battery is equivalent to the Tudor TE2353?

In EFB or AGM, with its dimensions and polarity: Exide EE2353, Fulmen FE2353 and Deta DE2353. A conventional battery does not replace the TE2353.

Are truck batteries fitted in pairs?

Almost always, in series for 24 V. Replace them in matched pairs: mixing a new one with an old one unbalances charging and shortens the new one's life.

More batteries to compare with the TE2353

Reviews

This product has no reviews yet. If you own it, tell us how it has gone: it will help whoever is looking at it now.

Loading...
Back to top