Tudor TC412 · Car battery 12V 41Ah 370A
Reference: BOL-TUDOR-TC412 · EAN 3661024054843
The Tudor TC412 is a car battery with 12 V, 41 Ah and 370 A cold cranking current, case size LB1 (207 × 175 × 175 mm), with the positive terminal on the right.
- Voltage
- 12V
- Capacity
- 41Ah
- Cold cranking amps (EN)
- 370A
- Technology
- Lead-acid
- Dimensions (L × W × H)
- 207 × 175 × 175 mm
- Polarity
- Positive terminal on the right
VAT included. The exact shipping cost is shown in the cart before you pay.
PayPal, bank transfer or cash on delivery, always over an encrypted connection.
For Spain, Portugal, France, Germany, Italy, Belgium and the Netherlands you see the exact cost before paying. For the rest of Europe we send you a shipping quote, with no obligation.
If it does not fit, you have 14 days from delivery to return it unused.
Does it fit your vehicle? Check by number plate or VIN
Enter your number plate or chassis number (VIN): we check whether this battery is compatible with your vehicle.
The Tudor TC412 at a glance
The Tudor TC412 is a starter battery for cars without Start-Stop: it delivers the current the starter motor needs and then powers lights, control units and audio with the engine off. Its job is to start the engine in the cold with margin to spare and keep the car's electronics powered.
At 41 Ah it is a small size: the usual choice for petrol superminis and city cars with little equipment. The TC412 belongs to the Tudor TUDOR Standard range. The full range of Tudor batteries
Part numbers and codes for the Tudor TC412
The TC412 is listed under these codes on labels, in garages and in catalogues:
| Commercial reference | TC412 |
|---|---|
| EAN | 3661024054843 |
| Case size (EN) | LB1 |
| Terminal type | EN taper post |
Tudor TC412 vs TB442, TC440 and TA472: which one to choose?
How the TC412 compares with Tudor batteries of similar size and capacity:
| Model | Capacity | Cold cranking (EN) | Dimensions (mm) | Positive | Weight |
|---|---|---|---|---|---|
| Tudor TC412 (this one) | 41 Ah | 370 A | 207 × 175 × 175 | right | 10.6 kg |
| Tudor TB442 | 44 Ah | 420 A | 207 × 175 × 175 | right | 10.6 kg |
| Tudor TC440 | 44 Ah | 360 A | 207 × 175 × 190 | right | 11 kg |
| Tudor TA472 | 47 Ah | 450 A | 207 × 175 × 175 | right | 11.4 kg |
- Tudor TB442: 3 Ah more, 50 A more cranking power, the same LB1 case.
- Tudor TC440: 3 Ah more, 10 A less cranking power, a different height (190 mm instead of 175 mm, L1). It only fits if there is room for 190 mm of height.
- Tudor TA472: 6 Ah more, 80 A more cranking power, the same LB1 case.
Equivalents and alternatives to the Tudor TC412
Batteries that fit the TC412's tray with the same polarity; besides other conventional batteries, an EFB or AGM of this size is a valid upgrade for the TC412.
| Model | Technology | Capacity | Cold cranking (EN) | Dimensions (mm) |
|---|---|---|---|---|
| Exide EC412 | Lead-acid | 41 Ah | 370 A | 207 × 175 × 175 |
| Fulmen FC412 | Lead-acid | 41 Ah | 370 A | 207 × 175 × 175 |
| Deta DC412 | Lead-acid | 41 Ah | 370 A | 207 × 175 × 175 |
| Varta A17 | Lead-acid | 41 Ah | 360 A | 207 × 175 × 175 |
| Kronobat SD-41.0B | Lead-acid | 41 Ah | 360 A | 207 × 175 × 175 |
| Exide EB442 | Lead-acid | 44 Ah | 420 A | 207 × 175 × 175 |
What it means that the TC412 is lead-acid
The TC412 is a conventional lead-acid battery, with plates immersed in liquid electrolyte. Avoid leaving them discharged, as they sulphate, and charge them with a charger that cuts off or switches to maintenance when finished.
Check this before ordering the Tudor TC412
- If your car has Start-Stop, the TC412 is not the right one: it needs an EFB or an AGM.
- Check the EN amps on your battery: if it says 370 A or less, the TC412 covers your engine.
- With 41 Ah, the TC412 replaces an original battery of that capacity or slightly less.
- With the terminals facing you, the positive terminal of the TC412 is on the right.
- The TC412 needs 207 × 175 × 175 mm of space (European case size LB1): measure it with the hold-down clamp in place.
Frequently asked questions about the Tudor TC412
TC412 or TB442: which one suits me?
Compared with the TC412, the Tudor TB442 has 3 Ah more and 50 A more cranking power. If your current battery says 420 A or more, choose the TB442; if it says 370 A or less, the TC412 is enough. Both measure 207 × 175 × 175 mm, so they fit the same tray.
Tudor TC412 or TC440: what changes?
Mainly the height: the TC412 is 175 mm tall (LB1) and the Tudor TC440 190 mm (L1), with the same length and width. In capacity and cranking power, the TC440 offers 44 Ah and 360 A against 41 Ah and 370 A. Before choosing between the TC412 and the TC440, measure the free height of the battery compartment with the cover or bonnet closed.
Can the Tudor TC412 be used in a car with Start-Stop?
No. The TC412 is a lead-acid battery for cars without automatic engine stop; Start-Stop needs an EFB or an AGM.
How much does the Tudor TC412 weigh?
10.6 kg, with 41 Ah of capacity. For reference, the Tudor TB442 (44 Ah) weighs 10.6 kg.
Which battery is equivalent to the Tudor TC412?
With the same dimensions, polarity and similar capacity you have the Exide EC412, Fulmen FC412 and Deta DC412. As the TC412 is a conventional battery, an EFB or AGM of the same size also works.
What case size is the Tudor TC412?
Case size LB1: 207 × 175 × 175 mm. The TC412 fits any standard LB1 battery tray such as the Exide EC412.
Which side is the positive terminal on the Tudor TC412?
On the TC412, the positive terminal is on the right with the terminals facing you: compare it with your current battery, because with reversed polarity the cables will not reach.
Other options if you are unsure about the TC412
- All car batteries
- More Tudor models
- Exide EC412 · 41 Ah, 370 A, 207×175×175 mm
- Fulmen FC412 · 41 Ah, 370 A, 207×175×175 mm
Reviews
This product has no reviews yet. If you own it, tell us how it has gone: it will help whoever is looking at it now.