Tudor

Tudor TB708 · Car battery 12V 70Ah 740A

Reference: BOL-TUDOR-TB708 · EAN 3661024057165

Tudor TB708: car battery with 12 V, 70 Ah and 740 A cold cranking current, measuring 260 × 180 × 186 mm, with the positive terminal on the left.

Voltage
12V
Capacity
70Ah
Cold cranking amps (EN)
740A
Technology
Lead-acid
Dimensions (L × W × H)
260 × 180 × 186 mm
Polarity
Positive terminal on the left
Price: €196.21
Tax included

VAT included. The exact shipping cost is shown in the cart before you pay.

Share

Does it fit your vehicle? Check by number plate or VIN

Enter your number plate or chassis number (VIN): we check whether this battery is compatible with your vehicle.

Who the Tudor TB708 is for

The Tudor TB708 is a starter battery for cars without Start-Stop: it delivers the current the starter motor needs and then powers lights, control units and audio with the engine off. The TB708 covers the daily routine of a car without automatic engine stop: cold starts, short trips and loads with the ignition off.

At 70 Ah it is the usual size for compact diesels and mid-size petrol saloons. The TB708 belongs to the Tudor TUDOR TECHNICA range. More Tudor batteries

Part numbers and codes for the Tudor TB708

Look for any of these TB708 codes on your current battery or in the manufacturer's catalogue:

Commercial referenceTB708
EAN3661024057165
Not to be confused withTudor TB608 (60 Ah, 640 A), Tudor TB758 (75 Ah, 770 A), Tudor TB704 (70 Ah, 540 A, positive terminal on the right)

Tudor TB708 vs TB758 and TB741: which one to choose?

The real differences between the TB708 and the closest Tudor models:

ModelCapacityCold cranking (EN)Dimensions (mm)PositiveWeight
Tudor TB708 (this one)70 Ah740 A260 × 180 × 186left16.7 kg
Tudor TB75875 Ah770 A260 × 180 × 186left16.7 kg
Tudor TB74174 Ah680 A278 × 175 × 190left16.6 kg
  • Tudor TB758: 5 Ah more, 30 A more cranking power, the same dimensions.
  • Tudor TB741: 4 Ah more, 60 A less cranking power, a different case (278 × 175 × 190 mm).

Equivalents and alternatives to the Tudor TB708

Batteries that fit the TB708's tray with the same polarity; besides other conventional batteries, an EFB or AGM of this size is a valid upgrade for the TB708.

ModelTechnologyCapacityCold cranking (EN)Dimensions (mm)
Exide EB708Lead-acid70 Ah740 A260 × 180 × 186

What it means that the TB708 is lead-acid

The TB708 is a conventional lead-acid battery, with plates immersed in liquid electrolyte. In cars without energy management, the TB708 needs no special registration: just connect it.

Check this before ordering the Tudor TB708

  • If your car has Start-Stop, the TB708 is not the right one: it needs an EFB or an AGM.
  • Check the EN amps on your battery: if it says 740 A or less, the TB708 covers your engine.
  • With 70 Ah, the TB708 replaces an original battery of that capacity or slightly less.
  • Polarity of the TB708: positive terminal on the left (if yours has it on the other side, the cables will not reach).
  • Length, width and height of the TB708: 260 × 180 × 186 mm.

Frequently asked questions about the Tudor TB708

TB708 or TB758: which one suits me?

Compared with the TB708, the Tudor TB758 has 5 Ah more and 30 A more cranking power. If your current battery says 770 A or more, choose the TB758; if it says 740 A or less, the TB708 is enough. Both measure 260 × 180 × 186 mm, so they fit the same tray.

Can the Tudor TB708 be used in a car with Start-Stop?

No. The TB708 is a lead-acid battery for cars without automatic engine stop; Start-Stop needs an EFB or an AGM.

How much does the Tudor TB708 weigh?

16.7 kg, with 70 Ah of capacity. For reference, the Tudor TB758 (75 Ah) weighs 16.7 kg.

Which battery is equivalent to the Tudor TB708?

With the same dimensions, polarity and similar capacity you have the Exide EB708. As the TB708 is a conventional battery, an EFB or AGM of the same size also works.

Which side is the positive terminal on the Tudor TB708?

On the TB708, the positive terminal is on the left with the terminals facing you: compare it with your current battery, because with reversed polarity the cables will not reach.

Which charger does the Tudor TB708 need?

An automatic lead-acid charger with cut-off or maintenance mode, rated at 10 to 20% of its capacity in amps. If it is a vented type, check the electrolyte level and top up only with distilled water.

More batteries to compare with the TB708

Reviews

This product has no reviews yet. If you own it, tell us how it has gone: it will help whoever is looking at it now.

Loading...
Back to top