Fulmen FB605 · Car battery 12V 60Ah 480A
Reference: BOL-FULMEN-FB605 · EAN 3661024044424
Fulmen FB605: car battery with 12 V, 60 Ah and 480 A cold cranking current, case size D23 (230 × 173 × 222 mm), with the positive terminal on the left. With the positive terminal on the right, the exact counterpart is the Fulmen FB604.
- Voltage
- 12V
- Capacity
- 60Ah
- Cold cranking amps (EN)
- 480A
- Technology
- Lead-acid
- Dimensions (L × W × H)
- 230 × 173 × 222 mm
- Polarity
- Positive terminal on the left
I prefer to fill in the form
Ask for a price for your Fulmen FB605 · Car battery 12V 60Ah 480A
- We reply within 4 working hours
- Fixed price before you pay
PayPal, bank transfer or cash on delivery, always over an encrypted connection.
For Spain, Portugal, France, Germany, Italy, Belgium and the Netherlands you see the exact cost before paying. For the rest of Europe we send you a shipping quote, with no obligation.
If it does not fit, you have 14 days from delivery to return it unused.
Does it fit your vehicle? Check by number plate or VIN
Enter your number plate or chassis number (VIN): we check whether this battery is compatible with your vehicle.
Who the Fulmen FB605 is for
The Fulmen FB605 is a starter battery for cars without Start-Stop: it delivers the current the starter motor needs and then powers lights, control units and audio with the engine off. If your car has no Start-Stop and had a 60 Ah battery, the FB605 is a direct replacement.
At 60 Ah it covers petrol compacts and small diesels, the best-selling format in Europe. The FB605 belongs to the Fulmen FULMEN Formula range. More Fulmen batteries
Fulmen FB605 codes and part numbers
Look for any of these FB605 codes on your current battery or in the manufacturer's catalogue:
| Commercial reference | FB605 |
|---|---|
| EAN | 3661024044424 |
| Case size (EN) | D23 |
| Not to be confused with | Fulmen FL605 (60 Ah, 520 A), Fulmen FB505 (50 Ah, 360 A), Fulmen FB602 (60 Ah, 540 A, positive terminal on the right) |
Fulmen FB605 vs FL605, FB604 and FB505: which one to choose?
What sets the FB605 apart from its neighbours in the Fulmen range:
| Model | Capacity | Cold cranking (EN) | Dimensions (mm) | Positive | Weight |
|---|---|---|---|---|---|
| Fulmen FB605 (this one) | 60 Ah | 480 A | 230 × 173 × 222 | left | 14.6 kg |
| Fulmen FL605 | 60 Ah | 520 A | 230 × 173 × 222 | left | 15.8 kg |
| Fulmen FB604 | 60 Ah | 480 A | 230 × 173 × 222 | right | 14.6 kg |
| Fulmen FB505 | 50 Ah | 360 A | 200 × 173 × 222 | left | 12.9 kg |
- Fulmen FL605: the same capacity, 40 A more cranking power, the same D23 case, EFB technology.
- Fulmen FB604: identical to the FB605 except for the positive terminal, which is on the other side (positive terminal on the right).
- Fulmen FB505: 10 Ah less, 120 A less cranking power, a different case (200 × 173 × 222 mm).
Equivalents and alternatives to the Fulmen FB605
Same dimensions and polarity as the FB605, with similar capacity and cranking power; as a conventional battery, the FB605 can also be replaced by an EFB or AGM of the same size if you want more cycles.
| Model | Technology | Capacity | Cold cranking (EN) | Dimensions (mm) |
|---|---|---|---|---|
| Exide EB605 | Lead-acid | 60 Ah | 480 A | 230 × 173 × 222 |
| Tudor TB605 | Lead-acid | 60 Ah | 480 A | 230 × 173 × 222 |
| Deta DB605 | Lead-acid | 60 Ah | 480 A | 230 × 173 × 222 |
| Exide EL605 | EFB | 60 Ah | 520 A | 230 × 173 × 222 |
| Tudor TL605 | EFB | 60 Ah | 520 A | 230 × 173 × 222 |
| Varta D48 | Lead-acid | 60 Ah | 540 A | 232 × 173 × 225 |
Lead-acid technology in the FB605
The FB605 is a conventional lead-acid battery, with plates immersed in liquid electrolyte. In cars without energy management, the FB605 needs no special registration: just connect it.
Before ordering the FB605, check this
- If your car has Start-Stop, the FB605 is not the right one: it needs an EFB or an AGM.
- Cold cranking: 480 A (EN), equal to or higher than the original.
- Your current battery should say about 60 Ah; a little more is also fine.
- Polarity of the FB605: positive terminal on the left (if yours has it on the other side, the cables will not reach).
- The FB605 needs 230 × 173 × 222 mm of space (European case size D23): measure it with the hold-down clamp in place.
Frequently asked questions about the Fulmen FB605
Fulmen FB605 or FL605?
Compared with the FB605, the Fulmen FL605 has 40 A more cranking power and EFB technology. If your current battery says 520 A or more, choose the FL605; if it says 480 A or less, the FB605 is enough. Both measure 230 × 173 × 222 mm, so they fit the same tray.
What is the difference between the Fulmen FB605 and the FB604?
They are the same battery with the terminals swapped: positive terminal on the left on the FB605, positive terminal on the right on the FB604. Look at your current battery with the terminals facing you and pick the one that matches.
Can the Fulmen FB605 be used in a car with Start-Stop?
No. The FB605 is a lead-acid battery for cars without automatic engine stop; Start-Stop needs an EFB or an AGM; in this same size there is the Exide EL605.
How much does the Fulmen FB605 weigh?
The FB605 weighs 14.6 kg. For reference, the Fulmen FL605 (60 Ah) weighs 15.8 kg.
Which battery is equivalent to the Fulmen FB605?
With the same dimensions, polarity and similar capacity you have the Exide EB605, Tudor TB605 and Deta DB605. As the FB605 is a conventional battery, an EFB or AGM of the same size also works.
What case size is the Fulmen FB605?
Case size D23: 230 × 173 × 222 mm. The FB605 fits any standard D23 battery tray such as the Exide EB605.
Other options if you are unsure about the FB605
- All car batteries
- Full Fulmen catalogue
- Exide EB605 · 60 Ah, 480 A, 230×173×222 mm
- Tudor TB605 · 60 Ah, 480 A, 230×173×222 mm
Reviews
This product has no reviews yet. If you own it, tell us how it has gone: it will help whoever is looking at it now.