Fullriver
Fullriver FT1210 · Boat battery 12V 140Ah 1,210A
Reference: BOL-FULLRIVER-FT1210
Fullriver FT1210: boat battery with 12 V, 140 Ah and 1,210 A cold cranking current, measuring 327 × 182 × 273 mm.
Fullriver FT1210 · Boat battery 12V 140Ah 1,210A images
- Voltage
- 12V
- Capacity
- 140Ah
- Cold cranking amps (EN)
- 1210A
- Technology
- AGM
- Dimensions (L × W × H)
- 327 × 182 × 273 mm
Price:
€629.94
Tax included
VAT included. The exact shipping cost is shown in the cart before you pay.
Secure payment
PayPal, bank transfer or cash on delivery, always over an encrypted connection.
Shipping with no surprises
For Spain, Portugal, France, Germany, Italy, Belgium and the Netherlands you see the exact cost before paying. For the rest of Europe we send you a shipping quote, with no obligation.
14 days to return your order
If it does not fit, you have 14 days from delivery to return it unused.
Where the Fullriver FT1210 fits
The Fullriver FT1210 is a battery for boats: engine starting or on-board service, depending on its design, with resistance to damp and hull vibration. Check whether your boat needs starting, service or a dual-purpose battery before choosing.
The FT1210 belongs to the Fullriver Full Throttle Series range. The full range of Fullriver batteries
Equivalents and alternatives to the Fullriver FT1210
We have no other battery with exactly the dimensions and polarity of the FT1210. Browse the rest of our marine and boat batteries to compare close options.
Fullriver FT1210 vs DC150-12 and DC145-12: differences
The real differences between the FT1210 and the closest Fullriver models:
| Model | Capacity | Cold cranking (EN) | Dimensions (mm) | Weight |
|---|---|---|---|---|
| Fullriver FT1210 (this one) | 140 Ah | 1,210 A | 327 × 182 × 273 | 44.5 kg |
| Fullriver DC150-12 | 150 Ah | 900 A | 327 × 182 × 294 | 42.6 kg |
| Fullriver DC145-12 | 145 Ah | 820 A | 341 × 173 × 287 | 43.8 kg |
- Fullriver DC150-12: 10 Ah more, 310 A less cranking power, a different case (327 × 182 × 294 mm).
- Fullriver DC145-12: 5 Ah more, 390 A less cranking power, a different case (341 × 173 × 287 mm).
Inside the FT1210: AGM technology
The FT1210 is AGM: the electrolyte is absorbed in glass fibre mats, so it is sealed and spill-proof. Being sealed, the FT1210 can be fitted in the boot or under a seat with no risk of spills.
Check this before ordering the Fullriver FT1210
- The FT1210 needs 327 × 182 × 273 mm of space: measure it with the hold-down clamp in place.
- Capacity of the FT1210: 140 Ah; the same as your current battery or slightly more is fine.
- The FT1210 delivers 1,210 A cold cranking (EN standard); do not go below what your original battery states.
Part numbers and codes for the Fullriver FT1210
Look for any of these FT1210 codes on your current battery or in the manufacturer's catalogue:
| Commercial reference | FT1210 |
|---|---|
| Terminal type | M8 |
Frequently asked questions about the Fullriver FT1210
FT1210 or DC150-12: which one suits me?
Compared with the FT1210, the Fullriver DC150-12 has 10 Ah more and 310 A less cranking power. The FT1210 cranks harder; the DC150-12 is only a good option if your original battery says 900 A or less. Mind the space: the DC150-12 measures 327 × 182 × 294 mm.
How much does the Fullriver FT1210 weigh?
44.5 kg, with 140 Ah of capacity. For reference, the Fullriver DC150-12 (150 Ah) weighs 42.6 kg.
Can the Fullriver FT1210 be used for starting and service at the same time?
Only if it is dual purpose. A starter battery is not built for deep discharge, and a service battery does not deliver the current peak the engine asks for.
Keep comparing: alternatives to the FT1210
Reviews
This product has no reviews yet. If you own it, tell us how it has gone: it will help whoever is looking at it now.
