Fulbat FP6-10 · UPS battery 6V 10Ah
Reference: BOL-FULBAT-FP6-10
Fulbat FP6-10: UPS battery with 6 V and 10 Ah, measuring 151 × 51 × 100 mm, with the positive terminal on the left.
- Voltage
- 6V
- Capacity
- 10Ah
- Technology
- AGM
- Dimensions (L × W × H)
- 151 × 51 × 100 mm
- Polarity
- Positive terminal on the left
I prefer to fill in the form
Ask for a price for your Fulbat FP6-10 · UPS battery 6V 10Ah
- We reply within 4 working hours
- Fixed price before you pay
PayPal, bank transfer or cash on delivery, always over an encrypted connection.
For Spain, Portugal, France, Germany, Italy, Belgium and the Netherlands you see the exact cost before paying. For the rest of Europe we send you a shipping quote, with no obligation.
If it does not fit, you have 14 days from delivery to return it unused.
Where the Fulbat FP6-10 fits
The Fulbat FP6-10 replaces the original batteries in a UPS. The FP6-10 spends most of its life on float charge, waiting for a power cut.
The FP6-10 belongs to the Fulbat FULBAT FP General Purpose range. More Fulbat batteries
Equivalents and alternatives to the Fulbat FP6-10
Other AGM batteries that fit the FP6-10's tray with the same polarity: an AGM can only be replaced by another AGM.
| Model | Technology | Capacity | Dimensions (mm) |
|---|---|---|---|
| Long WP10-6 | AGM | 10 Ah | 151 × 50 × 100 |
| Long WP12-6S | AGM | 12 Ah | 151 × 50 × 99 |
| Ritar RT6120 | AGM | 12 Ah | 151 × 50 × 101 |
| Fulbat FP6-12 | AGM | 12 Ah | 151 × 50.5 × 100 |
Fulbat FP6-10 vs FP6-12 and FP6-7.2
What sets the FP6-10 apart from its neighbours in the Fulbat range:
| Model | Capacity | Dimensions (mm) | Positive | Weight |
|---|---|---|---|---|
| Fulbat FP6-10 (this one) | 10 Ah | 151 × 51 × 100 | left | 1.54 kg |
| Fulbat FP6-12 | 12 Ah | 151 × 50.5 × 100 | left | 1.6 kg |
| Fulbat FP6-7.2 | 7.2 Ah | 151 × 34 × 100 | left | 1.05 kg |
- Fulbat FP6-12: 2 Ah more, the same dimensions.
- Fulbat FP6-7.2: 2.8 Ah less, a different case (151 × 34 × 100 mm).
Inside the FP6-10: AGM technology
Inside, the FP6-10 has glass fibre separators (AGM) that hold the electrolyte. It is fitted in cars with advanced Start-Stop and in deep-cycle equipment.
Check this before ordering the Fulbat FP6-10
- The FP6-10 needs 151 × 51 × 100 mm of space: measure it with the hold-down clamp in place.
- With the terminals facing you, the positive terminal of the FP6-10 is on the left.
- Your current battery should say about 10 Ah; a little more is also fine.
Part numbers and codes for the Fulbat FP6-10
Shops, garages and catalogues identify the FP6-10 with these codes:
| Commercial reference | FP6-10 |
|---|---|
| Terminal type | T1 |
| Not to be confused with | Fulbat FP6-1.2 (1.2 Ah), Fulbat FP6-12 (12 Ah) |
Frequently asked questions about the Fulbat FP6-10
FP6-10 or FP6-12: which one suits me?
Compared with the FP6-10, the Fulbat FP6-12 has 2 Ah more. With 12 Ah, the FP6-12 runs longer between charges than the FP6-10 (10 Ah). Both measure 151 × 51 × 100 mm, so they fit the same tray.
How much does the Fulbat FP6-10 weigh?
1.54 kg, with 10 Ah of capacity. For reference, the Fulbat FP6-12 (12 Ah) weighs 1.6 kg.
Which battery is equivalent to the Fulbat FP6-10?
Only other AGM batteries with its dimensions and polarity: Long WP10-6, Long WP12-6S and Ritar RT6120. Neither an EFB nor a conventional battery replaces the FP6-10.
Which side is the positive terminal on the Fulbat FP6-10?
On the FP6-10, the positive terminal is on the left with the terminals facing you: compare it with your current battery, because with reversed polarity the cables will not reach.
Keep comparing: alternatives to the FP6-10
- All uPS batteries
- More Fulbat models
- Long WP10-6 · 10 Ah, 151×50×100 mm
- Long WP12-6S · 12 Ah, 151×50×99 mm
Reviews
This product has no reviews yet. If you own it, tell us how it has gone: it will help whoever is looking at it now.