Fulbat

Fulbat FP6-3.2 · UPS battery 6V 3.2Ah

Reference: BOL-FULBAT-FP6-3.2

Fulbat FP6-3.2: UPS battery with 6 V and 3.2 Ah, measuring 134 × 34 × 66 mm, with the positive terminal on the left.

Voltage
6V
Capacity
3.2Ah
Technology
AGM
Dimensions (L × W × H)
134 × 34 × 66 mm
Polarity
Positive terminal on the left
Solve it now by chat Our assistant replies instantly about batteries, shipping and orders, and opens the request you need.
I prefer to fill in the form
Free quote, no strings attached

Ask for a price for your Fulbat FP6-3.2 · UPS battery 6V 3.2Ah

  • We reply within 4 working hours
  • Fixed price before you pay
Add a photo (optional)
Photo of your current battery or the vehicle papers · up to 3 files of 8 MB · image or PDF
Share

Where the Fulbat FP6-3.2 fits

The Fulbat FP6-3.2 is a VRLA AGM battery for UPS and uninterruptible power systems: it stays charged for years waiting for an outage and delivers the energy instantly when it comes. Check dimensions, terminal type (F1 or F2) and capacity so it fits the unit.

The FP6-3.2 belongs to the Fulbat FULBAT FP General Purpose range. The full range of Fulbat batteries

AGM technology in the FP6-3.2

The FP6-3.2 is AGM: the electrolyte is absorbed in glass fibre mats, so it is sealed and spill-proof. It withstands many more cycles than a conventional lead battery, at the cost of being more sensitive to overcharging.

Fulbat FP6-3.2 vs FP6-2.8 and FP6-4: differences

What sets the FP6-3.2 apart from its neighbours in the Fulbat range:

ModelCapacityDimensions (mm)PositiveWeight
Fulbat FP6-3.2 (this one)3.2 Ah134 × 34 × 66left0.67 kg
Fulbat FP6-2.82.8 Ah66 × 33 × 103–0.55 kg
Fulbat FP6-44 Ah70 × 47 × 106–0.65 kg
  • Fulbat FP6-2.8: 0.40 Ah less, a different case (66 × 33 × 103 mm).
  • Fulbat FP6-4: 0.80 Ah more, a different case (70 × 47 × 106 mm).

Equivalents and alternatives to the Fulbat FP6-3.2

As the FP6-3.2 is an AGM battery, we only list other AGM batteries with its dimensions and polarity: neither an EFB nor a conventional battery can replace it.

ModelTechnologyCapacityDimensions (mm)
Ritar RT632AGM3.2 Ah134 × 35 × 67
Long WP3-6AGM3 Ah134 × 34 × 65

Fulbat FP6-3.2 codes and part numbers

The FP6-3.2 is listed under these codes on labels, in garages and in catalogues:

Commercial referenceFP6-3.2
Terminal typeT1
Not to be confused withFulbat FP6-1.2 (1.2 Ah), Fulbat FP6-7.2 (7.2 Ah), Fulbat FP6-12 (12 Ah)

Before ordering the FP6-3.2, check this

  • Your current battery should say about 3.2 Ah; a little more is also fine.
  • The FP6-3.2 has the positive terminal on the left: compare it with your current battery.
  • The FP6-3.2 needs 134 × 34 × 66 mm of space: measure it with the hold-down clamp in place.

Frequently asked questions about the Fulbat FP6-3.2

Fulbat FP6-3.2 or FP6-2.8?

Compared with the FP6-3.2, the Fulbat FP6-2.8 has 0.40 Ah less. With 3.2 Ah, the FP6-3.2 runs longer between charges than the FP6-2.8 (2.8 Ah). Mind the space: the FP6-2.8 measures 66 × 33 × 103 mm.

How much does the Fulbat FP6-3.2 weigh?

The FP6-3.2 weighs 0.67 kg. For reference, the Fulbat FP6-2.8 (2.8 Ah) weighs 0.55 kg.

Which battery is equivalent to the Fulbat FP6-3.2?

Only other AGM batteries with its dimensions and polarity: Ritar RT632 and Long WP3-6. Neither an EFB nor a conventional battery replaces the FP6-3.2.

Which side is the positive terminal on the Fulbat FP6-3.2?

The FP6-3.2 has the positive terminal on the left, looking at the battery from its long side with the terminals closest to you.

Which charger does the Fulbat FP6-3.2 need?

A charger with an AGM mode that limits voltage to about 14.4-14.7 V. Never an old unregulated charger: overcharging dries out an AGM beyond repair.

More batteries to compare with the FP6-3.2

Reviews

This product has no reviews yet. If you own it, tell us how it has gone: it will help whoever is looking at it now.

Loading...
Back to top