Exide
Exide EK013 · Car battery 12V 1.2Ah 18A
Reference: BOL-EXIDE-EK013 · EAN 3661024038058
The Exide EK013 is a car battery (AGM) with 12 V, 1.2 Ah and 18 A cold cranking current, measuring 97 × 43 × 58 mm.
Exide EK013 · Car battery 12V 1.2Ah 18A images
- Voltage
- 12V
- Capacity
- 1.2Ah
- Cold cranking amps (EN)
- 18A
- Technology
- AGM
- Dimensions (L × W × H)
- 97 × 43 × 58 mm
Price:
€37.64
Tax included
VAT included. The exact shipping cost is shown in the cart before you pay.
Secure payment
PayPal, bank transfer or cash on delivery, always over an encrypted connection.
Shipping with no surprises
For Spain, Portugal, France, Germany, Italy, Belgium and the Netherlands you see the exact cost before paying. For the rest of Europe we send you a shipping quote, with no obligation.
14 days to return your order
If it does not fit, you have 14 days from delivery to return it unused.
Does it fit your vehicle? Check by number plate or VIN
Enter your number plate or chassis number (VIN): we check whether this battery is compatible with your vehicle.
The Exide EK013 at a glance
The Exide EK013 is a starter battery for cars without Start-Stop: it delivers the current the starter motor needs and then powers lights, control units and audio with the engine off. The EK013 covers the daily routine of a car without automatic engine stop: cold starts, short trips and loads with the ignition off.
At 1.2 Ah it is a small size: the usual choice for petrol superminis and city cars with little equipment. The EK013 belongs to the Exide EXIDE Start-Stop Auxiliary range. The full range of Exide batteries
Part numbers and codes for the Exide EK013
Look for any of these EK013 codes on your current battery or in the manufacturer's catalogue:
| Commercial reference | EK013 |
|---|---|
| EAN | 3661024038058 |
| Terminal type | Faston S (4,8) |
Equivalents and alternatives to the Exide EK013
We have no other battery with exactly the dimensions and polarity of the EK013. Browse the rest of our car batteries to compare close options.
AGM technology in the EK013
The EK013 is AGM: the electrolyte is absorbed in glass fibre mats, so it is sealed and spill-proof. Being sealed, the EK013 can be fitted in the boot or under a seat with no risk of spills.
Before ordering the EK013, check this
- The EK013 is AGM: it replaces an AGM or an EFB of the same size. You can swap an EFB for an AGM, but not an AGM for an EFB.
- Check the EN amps on your battery: if it says 18 A or less, the EK013 covers your engine.
- Capacity of the EK013: 1.2 Ah; the same as your current battery or slightly more is fine.
- The EK013 needs 97 × 43 × 58 mm of space: measure it with the hold-down clamp in place.
Frequently asked questions about the Exide EK013
Can the Exide EK013 be used in a car with Start-Stop?
Yes. As an AGM battery, the EK013 handles automatic engine stop and brake energy recovery, and it can replace an EFB of the same size.
How much does the Exide EK013 weigh?
0.5 kg, with 1.2 Ah of capacity.
What is the cold cranking current of the Exide EK013?
18 A to the EN standard, with 1.2 Ah capacity.
Other options if you are unsure about the EK013
Reviews
This product has no reviews yet. If you own it, tell us how it has gone: it will help whoever is looking at it now.
