Exide

Exide AGM12-9 12N9-4B-1 · Motorcycle battery 12V 9Ah 120A

Reference: BOL-EXIDE-AGM12-9 · EAN 3661024033978

Exide AGM12-9 (JIS 12N9-4B-1): motorcycle battery (AGM) with 12 V, 9 Ah and 120 A cold cranking current, measuring 135 × 75 × 140 mm, with the positive terminal on the left.

Voltage
12V
Capacity
9Ah
Cold cranking amps (EN)
120A
Technology
AGM
Dimensions (L × W × H)
135 × 75 × 140 mm
Polarity
Positive terminal on the left
Price: €49.79
Tax included

VAT included. The exact shipping cost is shown in the cart before you pay.

Share

Does it fit your vehicle? Check by number plate or VIN

Enter your number plate or chassis number (VIN): we check whether this battery is compatible with your vehicle.

Who the Exide AGM12-9 is for

The Exide AGM12-9 is made for motorcycles, scooters and quads. With 9 Ah, the AGM12-9 suits motorcycles and scooters that had a battery of that capacity.

At 9 Ah it covers mid-capacity motorcycles, large scooters and light quads. The AGM12-9 belongs to the Exide EXIDE MOTORCYCLE AGM 12V range. More Exide batteries

Part numbers and codes for the Exide AGM12-9

Shops, garages and catalogues identify the AGM12-9 with these codes:

Commercial referenceAGM12-9
JIS code12N9-4B-1, 12N9-4B, YB9-B, YTX9C-BS
EAN3661024033978
Terminal typeM04
Not to be confused withExide AGM12-4 (3 Ah, 50 A, positive terminal on the right), Exide AGM12-5 (4 Ah, 70 A, positive terminal on the right), Exide AGM12-8 (8.6 Ah, 145 A)

Equivalents and alternatives to the Exide AGM12-9

Other AGM batteries that fit the AGM12-9's tray with the same polarity: an AGM can only be replaced by another AGM.

ModelTechnologyCapacityCold cranking (EN)Dimensions (mm)
Fulbat FT9A-BSAGM9.5 Ah115 A135 × 75 × 139
Exide ETX9C-BSAGM9 Ah120 A135 × 75 × 140

Exide AGM12-9 vs AGM12-10.5 and ET12B-BS

The real differences between the AGM12-9 and the closest Exide models:

ModelCapacityCold cranking (EN)Dimensions (mm)PositiveWeight
Exide AGM12-9 (this one)9 Ah120 A135 × 75 × 140left3.2 kg
Exide AGM12-10.510 Ah160 A150 × 70 × 130left3.6 kg
Exide ET12B-BS10 Ah160 A150 × 70 × 130left3.7 kg
  • Exide AGM12-10.5: 1 Ah more, 40 A more cranking power, a different case (150 × 70 × 130 mm).
  • Exide ET12B-BS: 1 Ah more, 40 A more cranking power, a different case (150 × 70 × 130 mm).

Before ordering the AGM12-9, check this

  • The AGM12-9 needs 135 × 75 × 140 mm of space: measure it with the hold-down clamp in place.
  • Polarity of the AGM12-9: positive terminal on the left (if yours has it on the other side, the cables will not reach).
  • Your current battery should say about 9 Ah; a little more is also fine.
  • Check the EN amps on your battery: if it says 120 A or less, the AGM12-9 covers your engine.

Frequently asked questions about the Exide AGM12-9

AGM12-9 or AGM12-10.5: which one suits me?

Compared with the AGM12-9, the Exide AGM12-10.5 has 1 Ah more and 40 A more cranking power. If your current battery says 160 A or more, choose the AGM12-10.5; if it says 120 A or less, the AGM12-9 is enough. Mind the space: the AGM12-10.5 measures 150 × 70 × 130 mm.

How much does the Exide AGM12-9 weigh?

3.2 kg, with 9 Ah of capacity. For reference, the Exide AGM12-10.5 (10 Ah) weighs 3.6 kg.

Which battery is equivalent to the Exide AGM12-9?

Only other AGM batteries with its dimensions and polarity: Fulbat FT9A-BS and Exide ETX9C-BS. Neither an EFB nor a conventional battery replaces the AGM12-9.

Which side is the positive terminal on the Exide AGM12-9?

On the AGM12-9, the positive terminal is on the left with the terminals facing you: compare it with your current battery, because with reversed polarity the cables will not reach.

What it means that the AGM12-9 is AGM

Inside, the AGM12-9 has glass fibre separators (AGM) that hold the electrolyte. It is fitted in cars with advanced Start-Stop and in deep-cycle equipment.

Keep comparing: alternatives to the AGM12-9

Reviews

This product has no reviews yet. If you own it, tell us how it has gone: it will help whoever is looking at it now.

Loading...
Back to top