Exide

Exide AGM12-4 YTX4L-BS · Motorcycle battery 12V 3Ah 50A

Reference: BOL-EXIDE-AGM12-4 · EAN 3661024033954

Exide AGM12-4 (JIS YTX4L-BS): motorcycle battery (AGM) with 12 V, 3 Ah and 50 A cold cranking current, measuring 115 × 70 × 85 mm, with the positive terminal on the right.

Voltage
12V
Capacity
3Ah
Cold cranking amps (EN)
50A
Technology
AGM
Dimensions (L × W × H)
115 × 70 × 85 mm
Polarity
Positive terminal on the right
Price: €26.46
Tax included

VAT included. The exact shipping cost is shown in the cart before you pay.

Share

Does it fit your vehicle? Check by number plate or VIN

Enter your number plate or chassis number (VIN): we check whether this battery is compatible with your vehicle.

The Exide AGM12-4 at a glance

The Exide AGM12-4 is a motorcycle starter battery: compact, vibration-resistant and with just the right power to turn the starter motor and feed the electronics. It is worth keeping the AGM12-4 on a maintenance charger if the bike is laid up over winter.

At 3 Ah it is a small battery, typical of 50 to 125 cc scooters and light motorcycles. The AGM12-4 belongs to the Exide EXIDE MOTORCYCLE AGM 12V range. The full range of Exide batteries

Exide AGM12-4 codes and part numbers

Look for any of these AGM12-4 codes on your current battery or in the manufacturer's catalogue:

Commercial referenceAGM12-4
JIS codeYTX4L-BS, YB4L-A, YB4L-B, YTZ5S
EAN3661024033954
Terminal typeM04
Not to be confused withExide AGM12-14 (12 Ah, 210 A), Exide AGM12-5 (4 Ah, 70 A), Exide AGM12-8 (8.6 Ah, 145 A, positive terminal on the left)

Equivalents and alternatives to the Exide AGM12-4

As the AGM12-4 is an AGM battery, we only list other AGM batteries with its dimensions and polarity: neither an EFB nor a conventional battery can replace it.

ModelTechnologyCapacityCold cranking (EN)Dimensions (mm)
Varta YTX4L-4 (FA)AGM3 Ah50 A113 × 70 × 87
Exide ETX4L-BSAGM3 Ah50 A115 × 70 × 85
Fulbat FTX4L-BS / FTZ5S-BSAGM4.2 Ah50 A113 × 70 × 85

Exide AGM12-4 vs AGM12-5 and ETX5L-BS: differences

The real differences between the AGM12-4 and the closest Exide models:

ModelCapacityCold cranking (EN)Dimensions (mm)PositiveWeight
Exide AGM12-4 (this one)3 Ah50 A115 × 70 × 85right1.2 kg
Exide AGM12-54 Ah70 A115 × 70 × 105right1.8 kg
Exide ETX5L-BS4 Ah70 A115 × 70 × 105right1.9 kg
  • Exide AGM12-5: 1 Ah more, 20 A more cranking power, a different case (115 × 70 × 105 mm).
  • Exide ETX5L-BS: 1 Ah more, 20 A more cranking power, a different case (115 × 70 × 105 mm).

What to look at before buying the AGM12-4

  • Length, width and height of the AGM12-4: 115 × 70 × 85 mm.
  • With the terminals facing you, the positive terminal of the AGM12-4 is on the right.
  • Your current battery should say about 3 Ah; a little more is also fine.
  • The AGM12-4 delivers 50 A cold cranking (EN standard); do not go below what your original battery states.

Frequently asked questions about the Exide AGM12-4

Exide AGM12-4 or AGM12-5?

Compared with the AGM12-4, the Exide AGM12-5 has 1 Ah more and 20 A more cranking power. If your current battery says 70 A or more, choose the AGM12-5; if it says 50 A or less, the AGM12-4 is enough. Mind the space: the AGM12-5 measures 115 × 70 × 105 mm.

How much does the Exide AGM12-4 weigh?

The AGM12-4 weighs 1.2 kg. For reference, the Exide AGM12-5 (4 Ah) weighs 1.8 kg.

Which battery is equivalent to the Exide AGM12-4?

Only other AGM batteries with its dimensions and polarity: Varta YTX4L-4 (FA), Exide ETX4L-BS and Fulbat FTX4L-BS / FTZ5S-BS. Neither an EFB nor a conventional battery replaces the AGM12-4.

Which side is the positive terminal on the Exide AGM12-4?

The AGM12-4 has the positive terminal on the right, looking at the battery from its long side with the terminals closest to you.

Which charger does the Exide AGM12-4 need?

A charger with an AGM mode that limits voltage to about 14.4-14.7 V. Never an old unregulated charger: overcharging dries out an AGM beyond repair.

What it means that the AGM12-4 is AGM

The AGM12-4 is AGM: the electrolyte is absorbed in glass fibre mats, so it is sealed and spill-proof. Being sealed, the AGM12-4 can be fitted in the boot or under a seat with no risk of spills.

Other options if you are unsure about the AGM12-4

Reviews

This product has no reviews yet. If you own it, tell us how it has gone: it will help whoever is looking at it now.

Loading...
Back to top