Deta DB442 · Car battery 12V 44Ah 420A
Reference: BOL-DETA-DB442 · EAN 3661024024600
The Deta DB442 is a car battery with 12 V, 44 Ah and 420 A cold cranking current, case size LB1 (207 × 175 × 175 mm), with the positive terminal on the right.
- Voltage
- 12V
- Capacity
- 44Ah
- Cold cranking amps (EN)
- 420A
- Technology
- Lead-acid
- Dimensions (L × W × H)
- 207 × 175 × 175 mm
- Polarity
- Positive terminal on the right
I prefer to fill in the form
Ask for a price for your Deta DB442 · Car battery 12V 44Ah 420A
- We reply within 4 working hours
- Fixed price before you pay
PayPal, bank transfer or cash on delivery, always over an encrypted connection.
For Spain, Portugal, France, Germany, Italy, Belgium and the Netherlands you see the exact cost before paying. For the rest of Europe we send you a shipping quote, with no obligation.
If it does not fit, you have 14 days from delivery to return it unused.
Does it fit your vehicle? Check by number plate or VIN
Enter your number plate or chassis number (VIN): we check whether this battery is compatible with your vehicle.
Who the Deta DB442 is for
The Deta DB442 is a starter battery for cars without Start-Stop: it delivers the current the starter motor needs and then powers lights, control units and audio with the engine off. If your car has no Start-Stop and had a 44 Ah battery, the DB442 is a direct replacement.
At 44 Ah it is a small size: the usual choice for petrol superminis and city cars with little equipment. The DB442 belongs to the Deta DETA Power range. See all Deta batteries
Deta DB442 vs DA472 and DC412: differences
How the DB442 compares with Deta batteries of similar size and capacity:
| Model | Capacity | Cold cranking (EN) | Dimensions (mm) | Positive | Weight |
|---|---|---|---|---|---|
| Deta DB442 (this one) | 44 Ah | 420 A | 207 × 175 × 175 | right | 10.6 kg |
| Deta DA472 | 47 Ah | 450 A | 207 × 175 × 175 | right | 11.4 kg |
| Deta DC412 | 41 Ah | 370 A | 207 × 175 × 175 | right | 10.6 kg |
- Deta DA472: 3 Ah more, 30 A more cranking power, the same LB1 case.
- Deta DC412: 3 Ah less, 50 A less cranking power, the same LB1 case.
Deta DB442 codes and part numbers
The DB442 is listed under these codes on labels, in garages and in catalogues:
| Commercial reference | DB442 |
|---|---|
| EAN | 3661024024600 |
| Case size (EN) | LB1 |
| Not to be confused with | Deta DB440 (44 Ah, 400 A) |
Equivalents and alternatives to the Deta DB442
Same dimensions and polarity as the DB442, with similar capacity and cranking power; as a conventional battery, the DB442 can also be replaced by an EFB or AGM of the same size if you want more cycles.
| Model | Technology | Capacity | Cold cranking (EN) | Dimensions (mm) |
|---|---|---|---|---|
| Exide EB442 | Lead-acid | 44 Ah | 420 A | 207 × 175 × 175 |
| Tudor TB442 | Lead-acid | 44 Ah | 420 A | 207 × 175 × 175 |
| Fulmen FB442 | Lead-acid | 44 Ah | 420 A | 207 × 175 × 175 |
| Varta B18 | Lead-acid | 44 Ah | 440 A | 207 × 175 × 175 |
| Kronobat PB-44.0B | Lead-acid | 44 Ah | 440 A | 207 × 175 × 175 |
| Exide EA472 | Lead-acid | 47 Ah | 450 A | 207 × 175 × 175 |
Its Bosch equivalent is the Bosch S4 001, the same as for the Varta B18. Bosch is not part of our catalogue; we list it so you can compare.
Check this before ordering the Deta DB442
- Length, width and height of the DB442: 207 × 175 × 175 mm (European case size LB1).
- With the terminals facing you, the positive terminal of the DB442 is on the right.
- With 44 Ah, the DB442 replaces an original battery of that capacity or slightly less.
- Cold cranking: 420 A (EN), equal to or higher than the original.
- If your car has Start-Stop, the DB442 is not the right one: it needs an EFB or an AGM.
What it means that the DB442 is lead-acid
The DB442 is a conventional lead-acid battery, with plates immersed in liquid electrolyte. Avoid leaving them discharged, as they sulphate, and charge them with a charger that cuts off or switches to maintenance when finished.
Frequently asked questions about the Deta DB442
Deta DB442 or DA472?
Compared with the DB442, the Deta DA472 has 3 Ah more and 30 A more cranking power. If your current battery says 450 A or more, choose the DA472; if it says 420 A or less, the DB442 is enough. Both measure 207 × 175 × 175 mm, so they fit the same tray.
Can the Deta DB442 be used in a car with Start-Stop?
No. The DB442 is a lead-acid battery for cars without automatic engine stop; Start-Stop needs an EFB or an AGM.
How much does the Deta DB442 weigh?
The DB442 weighs 10.6 kg. For reference, the Deta DA472 (47 Ah) weighs 11.4 kg.
Which battery is equivalent to the Deta DB442?
With the same dimensions, polarity and similar capacity you have the Exide EB442, Tudor TB442 and Fulmen FB442. As the DB442 is a conventional battery, an EFB or AGM of the same size also works. Its Bosch equivalent is the Bosch S4 001, the same as for the Varta B18. Bosch is not part of our catalogue; we list it so you can compare.
What case size is the Deta DB442?
Case size LB1: 207 × 175 × 175 mm. The DB442 fits any standard LB1 battery tray such as the Exide EB442.
Which side is the positive terminal on the Deta DB442?
The DB442 has the positive terminal on the right, looking at the battery from its long side with the terminals closest to you.
How long does a car battery like the Deta DB442 last?
Between 4 and 6 years in normal use. Very short trips, extreme heat and leaving the car parked for weeks without starting it shorten its life.
Other options if you are unsure about the DB442
- More car batteries
- The whole Deta range
- Exide EB442 · 44 Ah, 420 A, 207×175×175 mm
- Tudor TB442 · 44 Ah, 420 A, 207×175×175 mm
Reviews
This product has no reviews yet. If you own it, tell us how it has gone: it will help whoever is looking at it now.