Deta DA640 · Car battery 12V 64Ah 640A
Reference: BOL-DETA-DA640 · EAN 3661024024228
The Deta DA640 is a car battery with 12 V, 64 Ah and 640 A cold cranking current, case size L2 (242 × 175 × 190 mm), with the positive terminal on the right.
- Voltage
- 12V
- Capacity
- 64Ah
- Cold cranking amps (EN)
- 640A
- Technology
- Lead-acid
- Dimensions (L × W × H)
- 242 × 175 × 190 mm
- Polarity
- Positive terminal on the right
I prefer to fill in the form
Ask for a price for your Deta DA640 · Car battery 12V 64Ah 640A
- We reply within 4 working hours
- Fixed price before you pay
PayPal, bank transfer or cash on delivery, always over an encrypted connection.
For Spain, Portugal, France, Germany, Italy, Belgium and the Netherlands you see the exact cost before paying. For the rest of Europe we send you a shipping quote, with no obligation.
If it does not fit, you have 14 days from delivery to return it unused.
Does it fit your vehicle? Check by number plate or VIN
Enter your number plate or chassis number (VIN): we check whether this battery is compatible with your vehicle.
Where the Deta DA640 fits
The Deta DA640 is made for petrol and diesel cars without automatic engine stop. If your car has no Start-Stop and had a 64 Ah battery, the DA640 is a direct replacement.
At 64 Ah it is the usual size for compact diesels and mid-size petrol saloons. The DA640 belongs to the Deta DETA Senator3 range. The full range of Deta batteries
Deta DA640 vs DB620, DA612 and DK620: differences
How the DA640 compares with Deta batteries of similar size and capacity:
| Model | Capacity | Cold cranking (EN) | Dimensions (mm) | Positive | Weight |
|---|---|---|---|---|---|
| Deta DA640 (this one) | 64 Ah | 640 A | 242 × 175 × 190 | right | 14.9 kg |
| Deta DB620 | 62 Ah | 540 A | 242 × 175 × 190 | right | 13.9 kg |
| Deta DA612 | 61 Ah | 600 A | 242 × 175 × 175 | right | 14 kg |
| Deta DK620 | 62 Ah | 680 A | 242 × 175 × 190 | right | 17.9 kg |
- Deta DB620: 2 Ah less, 100 A less cranking power, the same L2 case.
- Deta DA612: 3 Ah less, 40 A less cranking power, a different height (175 mm instead of 190 mm, LB2). It is the option if your battery tray cannot take the 190 mm height of the DA640.
- Deta DK620: 2 Ah less, 40 A more cranking power, the same L2 case, AGM technology.
Part numbers and codes for the Deta DA640
Shops, garages and catalogues identify the DA640 with these codes:
| Commercial reference | DA640 |
|---|---|
| EAN | 3661024024228 |
| Case size (EN) | L2 |
Equivalents and alternatives to the Deta DA640
Batteries that fit the DA640's tray with the same polarity; besides other conventional batteries, an EFB or AGM of this size is a valid upgrade for the DA640.
| Model | Technology | Capacity | Cold cranking (EN) | Dimensions (mm) |
|---|---|---|---|---|
| Exide EA640 | Lead-acid | 64 Ah | 640 A | 242 × 175 × 190 |
| Tudor TA640 | Lead-acid | 64 Ah | 640 A | 242 × 175 × 190 |
| Fulmen FA640 | Lead-acid | 64 Ah | 640 A | 242 × 175 × 190 |
| Varta D15 | Lead-acid | 63 Ah | 610 A | 242 × 175 × 190 |
| Kronobat MS-63.0 | Lead-acid | 63 Ah | 610 A | 242 × 175 × 190 |
| Exide EK620 | AGM | 62 Ah | 680 A | 242 × 175 × 190 |
What to look at before buying the DA640
- The DA640 needs 242 × 175 × 190 mm of space (European case size L2): measure it with the hold-down clamp in place.
- Polarity of the DA640: positive terminal on the right (if yours has it on the other side, the cables will not reach).
- Your current battery should say about 64 Ah; a little more is also fine.
- Cold cranking: 640 A (EN), equal to or higher than the original.
- If your car has Start-Stop, the DA640 is not the right one: it needs an EFB or an AGM.
Lead-acid technology in the DA640
Inside, the DA640 is classic lead-acid: liquid electrolyte and lead plates. It is a robust, well-known technology with a good capacity-to-price ratio, and still the basis of most cars, trucks and traction equipment.
Frequently asked questions about the Deta DA640
DA640 or DB620: which one suits me?
Compared with the DA640, the Deta DB620 has 2 Ah less and 100 A less cranking power. The DA640 cranks harder; the DB620 is only a good option if your original battery says 540 A or less. Both measure 242 × 175 × 190 mm, so they fit the same tray.
Deta DA640 or DA612: what changes?
Mainly the height: the DA640 is 190 mm tall (L2) and the Deta DA612 175 mm (LB2), with the same length and width. In capacity and cranking power, the DA612 offers 61 Ah and 600 A against 64 Ah and 640 A. Before choosing between the DA640 and the DA612, measure the free height of the battery compartment with the cover or bonnet closed.
Can the Deta DA640 be used in a car with Start-Stop?
No. The DA640 is a lead-acid battery for cars without automatic engine stop; Start-Stop needs an EFB or an AGM; in this same size there is the Exide EK620.
How much does the Deta DA640 weigh?
14.9 kg, with 64 Ah of capacity. For reference, the Deta DB620 (62 Ah) weighs 13.9 kg.
Which battery is equivalent to the Deta DA640?
With the same dimensions, polarity and similar capacity you have the Exide EA640, Tudor TA640 and Fulmen FA640. As the DA640 is a conventional battery, an EFB or AGM of the same size also works.
What case size is the Deta DA640?
Case size L2: 242 × 175 × 190 mm. The DA640 fits any standard L2 battery tray such as the Exide EA640.
Which side is the positive terminal on the Deta DA640?
On the DA640, the positive terminal is on the right with the terminals facing you: compare it with your current battery, because with reversed polarity the cables will not reach.
Other options if you are unsure about the DA640
- Other car batteries
- Full Deta catalogue
- Exide EA640 · 64 Ah, 640 A, 242×175×190 mm
- Tudor TA640 · 64 Ah, 640 A, 242×175×190 mm
Reviews
This product has no reviews yet. If you own it, tell us how it has gone: it will help whoever is looking at it now.