Varta

Varta YB12A-A · Motorcycle battery 12V 12Ah 160A

Reference: BOL-VARTA-512011016 · EAN 4016987169292

The Varta YB12A-A (ETN 512 011 016, also written 512011016) is a motorcycle battery with 12 V, 12 Ah and 160 A cold cranking current, measuring 136 × 82 × 161 mm, with the positive terminal on the left. If yours has the positive terminal on the right, you need the Varta YB12AL-A2.

Voltage
12V
Capacity
12Ah
Cold cranking amps (EN)
160A
Technology
Lead-acid
Dimensions (L × W × H)
136 × 82 × 161 mm
Polarity
Positive terminal on the left
Price: €101.24
Tax included

VAT included. The exact shipping cost is shown in the cart before you pay.

Share

Does it fit your vehicle? Check by number plate or VIN

Enter your number plate or chassis number (VIN): we check whether this battery is compatible with your vehicle.

Who the Varta YB12A-A is for

The Varta YB12A-A is a motorcycle starter battery: compact, vibration-resistant and with just the right power to turn the starter motor and feed the electronics. It is worth keeping the YB12A-A on a maintenance charger if the bike is laid up over winter.

At 12 Ah it covers mid-capacity motorcycles, large scooters and light quads. Varta lists the YB12A-A in its Powersports SLI Freshpack line. The full range of Varta batteries

Varta YB12A-A codes and part numbers

The YB12A-A is listed under these codes on labels, in garages and in catalogues:

Commercial referenceYB12A-A
ETN code512011016 (also 512 011 016)
Manufacturer short code12N12A-4A-1/B12A-A
EAN4016987169292
Base hold-downB00
Terminal typeY6
Also known asVarta 512011016 · Varta 512 011 016 · Varta 12N12A-4A-1 · Varta B12A-A

Equivalents and alternatives to the Varta YB12A-A

Same dimensions and polarity as the YB12A-A, with similar capacity and cranking power; as a conventional battery, the YB12A-A can also be replaced by an EFB or AGM of the same size if you want more cycles.

ModelTechnologyCapacityCold cranking (EN)Dimensions (mm)
Exide EB12A-ALead-acid12 Ah165 A135 × 80 × 160
Fulbat FB12A-ALead-acid12.6 Ah155 A134 × 80 × 160
Fulbat FB12A-BLead-acid12.6 Ah155 A134 × 80 × 160
Varta YB12A-BLead-acid12 Ah160 A136 × 82 × 162
Motobatt MB12UAGM15 Ah160 A135 × 80 × 161

Varta YB12A-A vs B12A (FA), YB12AL-A2 and TX14AH (FA): which one to choose?

Torn between the YB12A-A and another similar Varta? This is what changes:

ModelCapacityCold cranking (EN)Dimensions (mm)PositiveWeight
Varta YB12A-A (this one)12 Ah160 A136 × 82 × 161left4.18 kg
Varta B12A (FA)12 Ah125 A134 × 81 × 160left3.88 kg
Varta YB12AL-A212 Ah160 A136 × 82 × 161right4.18 kg
Varta TX14AH (FA)12 Ah210 A133 × 90 × 164left4.4 kg
  • Varta B12A (FA): the same capacity, 35 A less cranking power, the same dimensions, AGM technology.
  • If the positive terminal of your battery is on the other side, the one you need is the Varta YB12AL-A2 (positive terminal on the right).
  • Varta TX14AH (FA): the same capacity, 50 A more cranking power, a different case (133 × 90 × 164 mm), AGM technology.

Check this before ordering the Varta YB12A-A

  • Check the EN amps on your battery: if it says 160 A or less, the YB12A-A covers your engine.
  • Your current battery should say about 12 Ah; a little more is also fine.
  • Polarity of the YB12A-A: positive terminal on the left (if yours has it on the other side, the cables will not reach).
  • Length, width and height of the YB12A-A: 136 × 82 × 161 mm.

Frequently asked questions about the Varta YB12A-A

Varta YB12A-A or B12A (FA)?

Compared with the YB12A-A, the Varta B12A (FA) has 35 A less cranking power and AGM technology. The YB12A-A cranks harder; the B12A (FA) is only a good option if your original battery says 125 A or less. Both measure 136 × 82 × 161 mm, so they fit the same tray.

What is the difference between the Varta YB12A-A and the YB12AL-A2?

They are the same battery with the terminals swapped: positive terminal on the left on the YB12A-A, positive terminal on the right on the YB12AL-A2. Look at your current battery with the terminals facing you and pick the one that matches. That is why their ETNs only differ in the middle group: 512 011 016 for the YB12A-A and 512 013 016 for the YB12AL-A2.

Is the Varta 512011016 the same battery as the Varta YB12A-A?

Yes. 512011016 is the ETN code Varta uses for its YB12A-A battery, so you can search for it by either code.

How much does the Varta YB12A-A weigh?

The YB12A-A weighs 4.18 kg. For reference, the Varta B12A (FA) (12 Ah) weighs 3.88 kg.

Which battery is equivalent to the Varta YB12A-A?

With the same dimensions, polarity and similar capacity you have the Exide EB12A-A, Fulbat FB12A-A and Fulbat FB12A-B. As the YB12A-A is a conventional battery, an EFB or AGM of the same size also works.

Which charger does the Varta YB12A-A need?

An automatic lead-acid charger with cut-off or maintenance mode, rated at 10 to 20% of its capacity in amps. If it is a vented type, check the electrolyte level and top up only with distilled water.

Inside the YB12A-A: lead-acid technology

The YB12A-A is a conventional lead-acid battery, with plates immersed in liquid electrolyte. Avoid leaving them discharged, as they sulphate, and charge them with a charger that cuts off or switches to maintenance when finished.

Keep comparing: alternatives to the YB12A-A

Reviews

This product has no reviews yet. If you own it, tell us how it has gone: it will help whoever is looking at it now.

Loading...
Back to top