Ritar HR12-150W · High-rate UPS battery 12V 40Ah
Reference: BOL-RITAR-HR12-150W
Ritar HR12-150W: high-rate UPS battery with 12 V and 40 Ah, measuring 198 × 166 × 169 mm.
- Voltage
- 12V
- Capacity
- 40Ah
- Technology
- AGM
- Dimensions (L × W × H)
- 198 × 166 × 169 mm
VAT included. The exact shipping cost is shown in the cart before you pay.
PayPal, bank transfer or cash on delivery, always over an encrypted connection.
For Spain, Portugal, France, Germany, Italy, Belgium and the Netherlands you see the exact cost before paying. For the rest of Europe we send you a shipping quote, with no obligation.
If it does not fit, you have 14 days from delivery to return it unused.
Who the Ritar HR12-150W is for
The Ritar HR12-150W is a high-rate battery for UPS: optimised to deliver a lot of power for a few minutes, the typical regime of a mains outage. Its key figure is watts per cell over 15 minutes, not amp-hours.
The HR12-150W belongs to the Ritar RITAR HR range. More Ritar batteries
What it means that the HR12-150W is AGM
The HR12-150W is AGM: the electrolyte is absorbed in glass fibre mats, so it is sealed and spill-proof. It withstands many more cycles than a conventional lead battery, at the cost of being more sensitive to overcharging.
Ritar HR12-150W vs HR12-125W and HR12-104W
What sets the HR12-150W apart from its neighbours in the Ritar range:
| Model | Capacity | Dimensions (mm) | Weight |
|---|---|---|---|
| Ritar HR12-150W (this one) | 40 Ah | 198 × 166 × 169 | 12.4 kg |
| Ritar HR12-125W | 33 Ah | 195 × 130 × 168 | 10 kg |
| Ritar HR12-104W | 26 Ah | 166 × 175 × 125 | 8.6 kg |
- Ritar HR12-125W: 7 Ah less, a different case (195 × 130 × 168 mm).
- Ritar HR12-104W: 14 Ah less, a different case (166 × 175 × 125 mm).
Equivalents and alternatives to the Ritar HR12-150W
Other AGM batteries that fit the HR12-150W's tray with the same polarity: an AGM can only be replaced by another AGM.
| Model | Technology | Capacity | Dimensions (mm) |
|---|---|---|---|
| Genesis G42EP | TPPL | 42 Ah | 196.6 × 165.1 × 169.9 |
Part numbers and codes for the Ritar HR12-150W
The HR12-150W is listed under these codes on labels, in garages and in catalogues:
| Commercial reference | HR12-150W |
|---|---|
| Terminal type | F11(M6) |
| Not to be confused with | Ritar HR12-50W (14 Ah) |
What to look at before buying the HR12-150W
- Your current battery should say about 40 Ah; a little more is also fine.
- Length, width and height of the HR12-150W: 198 × 166 × 169 mm.
Frequently asked questions about the Ritar HR12-150W
HR12-150W or HR12-125W: which one suits me?
Compared with the HR12-150W, the Ritar HR12-125W has 7 Ah less. With 40 Ah, the HR12-150W runs longer between charges than the HR12-125W (33 Ah). Mind the space: the HR12-125W measures 195 × 130 × 168 mm.
How much does the Ritar HR12-150W weigh?
12.4 kg, with 40 Ah of capacity. For reference, the Ritar HR12-125W (33 Ah) weighs 10 kg.
Which battery is equivalent to the Ritar HR12-150W?
Only other AGM batteries with its dimensions and polarity: Genesis G42EP. Neither an EFB nor a conventional battery replaces the HR12-150W.
Which charger does the Ritar HR12-150W need?
A charger with an AGM mode that limits voltage to about 14.4-14.7 V. Never an old unregulated charger: overcharging dries out an AGM beyond repair.
Keep comparing: alternatives to the HR12-150W
- Other high-rate UPS batteries
- Full Ritar catalogue
- Fulbat FPH12-1100W · 46.5 Ah, 197×165×170 mm
- Genesis G70EP · 72 Ah, 328.7×166.1×174 mm
Reviews
This product has no reviews yet. If you own it, tell us how it has gone: it will help whoever is looking at it now.