NOCO GENPRO10X1: on-board charger 10A 1 bank (12V)
Reference: BOL-NOCO-GENPRO10X1
For one big battery on board: 10 A and up to 230 Ah in a sealed IP68 charger weighing 1.81 kg.
- 1 bank of 10 A
- 12V up to 230 Ah
- Half-flat 100 Ah: about 7 h
- IP68, 150 W max.
- Lithium (BMS) and lead-acid
NOCO GENPRO10X1: on-board charger 10A 1 bank (12V) images
I prefer to fill in the form
Ask for a price for your NOCO GENPRO10X1: on-board charger 10A 1 bank (12V)
- We reply within 4 working hours
- Fixed price before you pay
Secure payment
PayPal, bank transfer or cash on delivery, always over an encrypted connection.
Shipping with no surprises
For Spain, Portugal, France, Germany, Italy, Belgium and the Netherlands you see the exact cost before paying. For the rest of Europe we send you a shipping quote, with no obligation.
14 days to return your order
If it does not fit, you have 14 days from delivery to return it unused.
NOCO GENPRO10X1: on-board charger 10A 1 bank (12V)
The NOCO GENPRO10X1 is for the boat or vehicle with a single large 12V battery of up to 230 Ah, or for anyone who wants faster recharging: at 10 A, a half-flat 100 Ah battery is back in about 7 h.
If your battery stays under 120 Ah and time is not pressing, the GEN5X1 (5 A) does the job in a smaller, lighter body. With two or more batteries, the series continues with the GENPRO10X2, X3 and X4, always at 10 A per bank.
Like the rest of the on-board range it is sealed to IP68 and mounts any way up.
Features
- • Single 10 A output at 12V.
- • Intended for batteries up to 230 Ah.
- • 12V lead-acid and lithium with BMS, LiFePO4 included.
- • Repair mode and Force Mode for 0 V batteries.
- • IP68 sealed, can be mounted upside down.
- • Charge adjusted to temperature.
- • Dimensions 145 x 122 x 71 mm.
Technical data
| Mains input voltage | 100-240 VAC, 50-60 Hz |
|---|---|
| Output power | 150 W max. |
| Charging banks | 1 |
| Charging current | 10 A (12 V) |
| Battery voltage | 12 V |
| Battery chemistries | Lead-acid (wet, gel, MF, calcium, EFB, AGM) and 12V lithium with BMS (incl. LiFePO4) |
| Battery capacity | Up to 230 Ah; maintains all battery sizes |
| Charging modes | 12V, 12V AGM, 12V Lithium, Repair and Force |
| Low-voltage detection | 1 V (Force Mode: 0 V) |
| Back current drain | < 0.5 mA |
| Operating temperature | -20 °C to +40 °C |
| Housing protection | IP68 |
| Cooling | Natural convection |
| DC cable length | approx. 1.83 m |
| Approx. charging time (50% depth of discharge) | 20 Ah: 1.5 h · 40 Ah: 3 h · 100 Ah: 7 h · 230 Ah: 17.3 h |
| Dimensions (L x W x H) | 145 x 122 x 71 mm |
| Weight | 1.81 kg |
In the box
- • GENPRO10X1 on-board charger
- • 2 x #8 27 mm self-tapping screws
- • User guide and warranty
Common questions
What do I gain over the GEN5X1?
Twice the current (10 A versus 5 A) and batteries up to 230 Ah instead of 120 Ah.
And with 230 Ah, how long?
About 17.3 h from half charge, according to NOCO.
Can it stay connected all the time?
Yes, it is built for permanent connection without overcharging.
Reviews
This product has no reviews yet. If you own it, tell us how it has gone: it will help whoever is looking at it now.