Kronobat PB-40.1F · Car battery 12V 40Ah 330A
Reference: BOL-KRONOBAT-PB-40.1F
Kronobat PB-40.1F: car battery with 12 V, 40 Ah and 330 A cold cranking current, case size B19 (187 × 127 × 227 mm), with the positive terminal on the left. If yours has the positive terminal on the right, you need the Kronobat PB-40.0T.
- Voltage
- 12V
- Capacity
- 40Ah
- Cold cranking amps (EN)
- 330A
- Technology
- Lead-acid
- Dimensions (L × W × H)
- 187 × 127 × 227 mm
- Polarity
- Positive terminal on the left
I prefer to fill in the form
Ask for a price for your Kronobat PB-40.1F · Car battery 12V 40Ah 330A
- We reply within 4 working hours
- Fixed price before you pay
PayPal, bank transfer or cash on delivery, always over an encrypted connection.
For Spain, Portugal, France, Germany, Italy, Belgium and the Netherlands you see the exact cost before paying. For the rest of Europe we send you a shipping quote, with no obligation.
If it does not fit, you have 14 days from delivery to return it unused.
Does it fit your vehicle? Check by number plate or VIN
Enter your number plate or chassis number (VIN): we check whether this battery is compatible with your vehicle.
The Kronobat PB-40.1F at a glance
The Kronobat PB-40.1F is a starter battery for cars without Start-Stop: it delivers the current the starter motor needs and then powers lights, control units and audio with the engine off. Its job is to start the engine in the cold with margin to spare and keep the car's electronics powered.
At 40 Ah it is a small size: the usual choice for petrol superminis and city cars with little equipment. The PB-40.1F belongs to the Kronobat PREMIUM range. See all Kronobat batteries
Kronobat PB-40.1F vs SD-45.1T, PB-40.0T and PB-45.1F: differences
What sets the PB-40.1F apart from its neighbours in the Kronobat range:
| Model | Capacity | Cold cranking (EN) | Dimensions (mm) | Positive | Weight |
|---|---|---|---|---|---|
| Kronobat PB-40.1F (this one) | 40 Ah | 330 A | 187 × 127 × 227 | left | 10.2 kg |
| Kronobat SD-45.1T | 45 Ah | 300 A | 219 × 135 × 225 | left | 10.8 kg |
| Kronobat PB-40.0T | 40 Ah | 330 A | 187 × 127 × 227 | right | 10.2 kg |
| Kronobat PB-45.1F | 45 Ah | 330 A | 238 × 129 × 227 | left | 11.7 kg |
- Kronobat SD-45.1T: 5 Ah more, 30 A less cranking power, a different case (219 × 135 × 225 mm).
- If the positive terminal of your battery is on the other side, the one you need is the Kronobat PB-40.0T (positive terminal on the right).
- Kronobat PB-45.1F: 5 Ah more, the same cranking power, a different case (238 × 129 × 227 mm).
Part numbers and codes for the Kronobat PB-40.1F
The PB-40.1F is listed under these codes on labels, in garages and in catalogues:
| Commercial reference | PB-40.1F |
|---|---|
| Case size (EN) | B19 |
| Not to be confused with | Kronobat PB-45.1F (45 Ah, 330 A), Kronobat PB-40.0F (40 Ah, 330 A, positive terminal on the right) |
Equivalents and alternatives to the Kronobat PB-40.1F
Batteries that fit the PB-40.1F's tray with the same polarity; besides other conventional batteries, an EFB or AGM of this size is a valid upgrade for the PB-40.1F.
| Model | Technology | Capacity | Cold cranking (EN) | Dimensions (mm) |
|---|---|---|---|---|
| Varta A15 | Lead-acid | 40 Ah | 330 A | 187 × 127 × 227 |
Check this before ordering the Kronobat PB-40.1F
- Measure the space: the PB-40.1F takes up 187 × 127 × 227 mm (European case size B19).
- The PB-40.1F has the positive terminal on the left: compare it with your current battery.
- Capacity of the PB-40.1F: 40 Ah; the same as your current battery or slightly more is fine.
- Cold cranking: 330 A (EN), equal to or higher than the original.
- If your car has Start-Stop, the PB-40.1F is not the right one: it needs an EFB or an AGM.
Lead-acid technology in the PB-40.1F
The PB-40.1F is a conventional lead-acid battery, with plates immersed in liquid electrolyte. Avoid leaving them discharged, as they sulphate, and charge them with a charger that cuts off or switches to maintenance when finished.
Frequently asked questions about the Kronobat PB-40.1F
PB-40.1F or SD-45.1T: which one suits me?
Compared with the PB-40.1F, the Kronobat SD-45.1T has 5 Ah more and 30 A less cranking power. The PB-40.1F cranks harder; the SD-45.1T is only a good option if your original battery says 300 A or less. Mind the space: the SD-45.1T measures 219 × 135 × 225 mm.
Kronobat PB-40.1F or PB-40.0T: what is the difference?
Only the polarity: the PB-40.1F has the positive terminal on the left and the PB-40.0T the positive terminal on the right. Capacity (40 Ah), cranking power and dimensions are identical.
Can the Kronobat PB-40.1F be used in a car with Start-Stop?
No. The PB-40.1F is a lead-acid battery for cars without automatic engine stop; Start-Stop needs an EFB or an AGM.
How much does the Kronobat PB-40.1F weigh?
10.2 kg, with 40 Ah of capacity. For reference, the Kronobat SD-45.1T (45 Ah) weighs 10.8 kg.
Which battery is equivalent to the Kronobat PB-40.1F?
With the same dimensions, polarity and similar capacity you have the Varta A15. As the PB-40.1F is a conventional battery, an EFB or AGM of the same size also works.
What case size is the Kronobat PB-40.1F?
Case size B19: 187 × 127 × 227 mm. The PB-40.1F fits any standard B19 battery tray such as the Varta A15.
Which charger does the Kronobat PB-40.1F need?
An automatic lead-acid charger with cut-off or maintenance mode, rated at 10 to 20% of its capacity in amps. If it is a vented type, check the electrolyte level and top up only with distilled water.
Other options if you are unsure about the PB-40.1F
- All car batteries
- The whole Kronobat range
- Varta A15 · 40 Ah, 330 A, 187×127×227 mm
Reviews
This product has no reviews yet. If you own it, tell us how it has gone: it will help whoever is looking at it now.