Fullriver FT450 · Boat battery 12V 30Ah 450A
Reference: BOL-FULLRIVER-FT450
The Fullriver FT450 is a boat battery with 12 V, 30 Ah and 450 A cold cranking current, measuring 250 × 97 × 156 mm.
- Voltage
- 12V
- Capacity
- 30Ah
- Cold cranking amps (EN)
- 450A
- Technology
- AGM
- Dimensions (L × W × H)
- 250 × 97 × 156 mm
VAT included. The exact shipping cost is shown in the cart before you pay.
PayPal, bank transfer or cash on delivery, always over an encrypted connection.
For Spain, Portugal, France, Germany, Italy, Belgium and the Netherlands you see the exact cost before paying. For the rest of Europe we send you a shipping quote, with no obligation.
If it does not fit, you have 14 days from delivery to return it unused.
Who the Fullriver FT450 is for
The Fullriver FT450 is a battery for boats: engine starting or on-board service, depending on its design, with resistance to damp and hull vibration. Check whether your boat needs starting, service or a dual-purpose battery before choosing.
The FT450 belongs to the Fullriver Full Throttle Series range. The full range of Fullriver batteries
Inside the FT450: AGM technology
The FT450 is AGM: the electrolyte is absorbed in glass fibre mats, so it is sealed and spill-proof. It withstands many more cycles than a conventional lead battery, at the cost of being more sensitive to overcharging.
Fullriver FT450 vs FT500 and FFD35-12
How the FT450 compares with Fullriver batteries of similar size and capacity:
| Model | Capacity | Cold cranking (EN) | Dimensions (mm) | Weight |
|---|---|---|---|---|
| Fullriver FT450 (this one) | 30 Ah | 450 A | 250 × 97 × 156 | 10.6 kg |
| Fullriver FT500 | 40 Ah | 500 A | 250 × 97 × 206 | 14 kg |
| Fullriver FFD35-12 | 35 Ah | 225 A | 196 × 131 × 167 | 9.9 kg |
- Fullriver FT500: 10 Ah more, 50 A more cranking power, a different case (250 × 97 × 206 mm).
- Fullriver FFD35-12: 5 Ah more, 225 A less cranking power, a different case (196 × 131 × 167 mm).
Equivalents and alternatives to the Fullriver FT450
No other reference in the catalogue fully matches the dimensions and polarity of the FT450; you will find the closest ones among our marine and boat batteries.
Fullriver FT450 codes and part numbers
The FT450 is listed under these codes on labels, in garages and in catalogues:
| Commercial reference | FT450 |
|---|---|
| Terminal type | M6M |
| Not to be confused with | Fullriver FT410 (28 Ah, 410 A) |
What to look at before buying the FT450
- The FT450 delivers 450 A cold cranking (EN standard); do not go below what your original battery states.
- Capacity of the FT450: 30 Ah; the same as your current battery or slightly more is fine.
- The FT450 needs 250 × 97 × 156 mm of space: measure it with the hold-down clamp in place.
Frequently asked questions about the Fullriver FT450
Fullriver FT450 or FT500?
Compared with the FT450, the Fullriver FT500 has 10 Ah more and 50 A more cranking power. If your current battery says 500 A or more, choose the FT500; if it says 450 A or less, the FT450 is enough. Mind the space: the FT500 measures 250 × 97 × 206 mm.
How much does the Fullriver FT450 weigh?
The FT450 weighs 10.6 kg. For reference, the Fullriver FT500 (40 Ah) weighs 14 kg.
What are the dimensions and weight of the Fullriver FT450?
It measures 250 × 97 × 156 mm and weighs 10.6 kg. Compare these figures with the tray and the hold-down clamp before ordering.
Keep comparing: alternatives to the FT450
- Other marine and boat batteries
- The whole Fullriver range
- Fullriver FT410L · 28 Ah, 410 A, 165×176×144 mm
Reviews
This product has no reviews yet. If you own it, tell us how it has gone: it will help whoever is looking at it now.