Fullriver FT1250-4DLT · Boat battery 12V 175Ah 1,250A
Reference: BOL-FULLRIVER-FT1250-4DLT
The Fullriver FT1250-4DLT is a boat battery with 12 V, 175 Ah and 1,250 A cold cranking current, measuring 513 × 223 × 222 mm.
- Voltage
- 12V
- Capacity
- 175Ah
- Cold cranking amps (EN)
- 1250A
- Technology
- AGM
- Dimensions (L × W × H)
- 513 × 223 × 222 mm
VAT included. The exact shipping cost is shown in the cart before you pay.
PayPal, bank transfer or cash on delivery, always over an encrypted connection.
For Spain, Portugal, France, Germany, Italy, Belgium and the Netherlands you see the exact cost before paying. For the rest of Europe we send you a shipping quote, with no obligation.
If it does not fit, you have 14 days from delivery to return it unused.
Where the Fullriver FT1250-4DLT fits
The Fullriver FT1250-4DLT is a battery for boats: engine starting or on-board service, depending on its design, with resistance to damp and hull vibration. Check whether your boat needs starting, service or a dual-purpose battery before choosing.
The FT1250-4DLT belongs to the Fullriver Full Throttle Series range. The full range of Fullriver batteries
Inside the FT1250-4DLT: AGM technology
The FT1250-4DLT is AGM: the electrolyte is absorbed in glass fibre mats, so it is sealed and spill-proof. It withstands many more cycles than a conventional lead battery, at the cost of being more sensitive to overcharging.
Fullriver FT1250-4DLT vs DC180-12 and DC220-12
Torn between the FT1250-4DLT and another similar Fullriver? This is what changes:
| Model | Capacity | Cold cranking (EN) | Dimensions (mm) | Weight |
|---|---|---|---|---|
| Fullriver FT1250-4DLT (this one) | 175 Ah | 1,250 A | 513 × 223 × 222 | 56.4 kg |
| Fullriver DC180-12 | 180 Ah | 990 A | 530 × 209 × 218 | 57.8 kg |
| Fullriver DC220-12 | 220 Ah | 1,150 A | 522 × 242 × 222 | 65.5 kg |
- Fullriver DC180-12: 5 Ah more, 260 A less cranking power, a different case (530 × 209 × 218 mm).
- Fullriver DC220-12: 45 Ah more, 100 A less cranking power, a different case (522 × 242 × 222 mm).
Equivalents and alternatives to the Fullriver FT1250-4DLT
We have no other battery with exactly the dimensions and polarity of the FT1250-4DLT. Browse the rest of our marine and boat batteries to compare close options.
Part numbers and codes for the Fullriver FT1250-4DLT
The FT1250-4DLT is listed under these codes on labels, in garages and in catalogues:
| Commercial reference | FT1250-4DLT |
|---|---|
| Terminal type | M8 + TP28 (SAE) |
Before ordering the FT1250-4DLT, check this
- Cold cranking: 1,250 A (EN), equal to or higher than the original.
- Your current battery should say about 175 Ah; a little more is also fine.
- The FT1250-4DLT needs 513 × 223 × 222 mm of space: measure it with the hold-down clamp in place.
Frequently asked questions about the Fullriver FT1250-4DLT
FT1250-4DLT or DC180-12: which one suits me?
Compared with the FT1250-4DLT, the Fullriver DC180-12 has 5 Ah more and 260 A less cranking power. The FT1250-4DLT cranks harder; the DC180-12 is only a good option if your original battery says 990 A or less. Mind the space: the DC180-12 measures 530 × 209 × 218 mm.
How much does the Fullriver FT1250-4DLT weigh?
56.4 kg, with 175 Ah of capacity. For reference, the Fullriver DC180-12 (180 Ah) weighs 57.8 kg.
Which charger does the Fullriver FT1250-4DLT need?
A charger with an AGM mode that limits voltage to about 14.4-14.7 V. Never an old unregulated charger: overcharging dries out an AGM beyond repair.
Other options if you are unsure about the FT1250-4DLT
Reviews
This product has no reviews yet. If you own it, tell us how it has gone: it will help whoever is looking at it now.