Fulbat 6N4B-2A · Motorcycle battery 6V 4.2Ah 35A
Reference: BOL-FULBAT-6N4B-2A
The Fulbat 6N4B-2A is a motorcycle battery with 6 V, 4.2 Ah and 35 A cold cranking current, measuring 102 × 48 × 96 mm, with the positive terminal on the left.
- Voltage
- 6V
- Capacity
- 4.2Ah
- Cold cranking amps (EN)
- 35A
- Technology
- Lead-acid
- Dimensions (L × W × H)
- 102 × 48 × 96 mm
- Polarity
- Positive terminal on the left
I prefer to fill in the form
Ask for a price for your Fulbat 6N4B-2A · Motorcycle battery 6V 4.2Ah 35A
- We reply within 4 working hours
- Fixed price before you pay
PayPal, bank transfer or cash on delivery, always over an encrypted connection.
For Spain, Portugal, France, Germany, Italy, Belgium and the Netherlands you see the exact cost before paying. For the rest of Europe we send you a shipping quote, with no obligation.
If it does not fit, you have 14 days from delivery to return it unused.
Does it fit your vehicle? Check by number plate or VIN
Enter your number plate or chassis number (VIN): we check whether this battery is compatible with your vehicle.
Who the Fulbat 6N4B-2A is for
The Fulbat 6N4B-2A is a motorcycle starter battery: compact, vibration-resistant and with just the right power to turn the starter motor and feed the electronics. It handles frame vibration and idle periods better than an adapted car battery.
At 4.2 Ah it is a small battery, typical of 50 to 125 cc scooters and light motorcycles. The 6N4B-2A belongs to the Fulbat FULBAT Motorcycle DRY range. More Fulbat batteries
Part numbers and codes for the Fulbat 6N4B-2A
The 6N4B-2A is listed under these codes on labels, in garages and in catalogues:
| Commercial reference | 6N4B-2A |
|---|---|
| Not to be confused with | Fulbat 6N4-2A (4.2 Ah, 25 A, positive terminal on the right) |
Equivalents and alternatives to the Fulbat 6N4B-2A
Batteries that fit the 6N4B-2A's tray with the same polarity; besides other conventional batteries, an EFB or AGM of this size is a valid upgrade for the 6N4B-2A.
| Model | Technology | Capacity | Cold cranking (EN) | Dimensions (mm) |
|---|---|---|---|---|
| Exide 6N4B-2A | Lead-acid | 4 Ah | 35 A | 100 × 50 × 95 |
Check this before ordering the Fulbat 6N4B-2A
- Length, width and height of the 6N4B-2A: 102 × 48 × 96 mm.
- The 6N4B-2A has the positive terminal on the left: compare it with your current battery.
- Your current battery should say about 4.2 Ah; a little more is also fine.
- Cold cranking: 35 A (EN), equal to or higher than the original.
Frequently asked questions about the Fulbat 6N4B-2A
How much does the Fulbat 6N4B-2A weigh?
0.93 kg, with 4.2 Ah of capacity.
Which battery is equivalent to the Fulbat 6N4B-2A?
With the same dimensions, polarity and similar capacity you have the Exide 6N4B-2A. As the 6N4B-2A is a conventional battery, an EFB or AGM of the same size also works.
What is the cold cranking current of the Fulbat 6N4B-2A?
35 A to the EN standard, with 4.2 Ah capacity.
Which side is the positive terminal on the Fulbat 6N4B-2A?
On the 6N4B-2A, the positive terminal is on the left with the terminals facing you: compare it with your current battery, because with reversed polarity the cables will not reach.
Does the Fulbat 6N4B-2A come charged and ready to fit?
Sealed AGM and gel batteries leave the factory charged and ready. Conventional ones with a separate acid pack are activated when filled and should be charged before fitting.
Lead-acid technology in the 6N4B-2A
The 6N4B-2A is a conventional lead-acid battery, with plates immersed in liquid electrolyte. Avoid leaving them discharged, as they sulphate, and charge them with a charger that cuts off or switches to maintenance when finished.
Other options if you are unsure about the 6N4B-2A
- All motorcycle batteries
- More Fulbat models
- Exide 6N4B-2A · 4 Ah, 35 A, 100×50×95 mm
Reviews
This product has no reviews yet. If you own it, tell us how it has gone: it will help whoever is looking at it now.