Exide

Exide ET1300 · Boat battery 12V 180Ah 900A

Reference: BOL-EXIDE-ET1300 · EAN 3661024035880

Exide ET1300: boat battery with 12 V, 180 Ah and 900 A cold cranking current, measuring 513 × 223 × 223 mm.

The Exide ET1300 at a glance

The Exide ET1300 is a battery for boats: engine starting or on-board service, depending on its design, with resistance to damp and hull vibration. With 180 Ah, the ET1300 suits boats that had a battery of that capacity.

The ET1300 belongs to the Exide EXIDE MARINA DUAL ET range. See all Exide batteries

Equivalents and alternatives to the Exide ET1300

Same dimensions and polarity as the ET1300, with similar capacity and cranking power; as a conventional battery, the ET1300 can also be replaced by an EFB or AGM of the same size if you want more cycles.

ModelTechnologyCapacityCold cranking (EN)Dimensions (mm)
Varta LFD180Lead-acid180 Ah1,000 A513 × 223 × 223
Varta LED190EFB190 Ah1,050 A513 × 223 × 223
Varta LA170AGM170 Ah1,000 A513 × 223 × 223
Exide EN1100Lead-acid180 Ah1,000 A513 × 223 × 223
Exide ER850Lead-acid180 Ah1,000 A513 × 223 × 223
Exide EP1500AGM180 Ah900 A513 × 223 × 223

Exide ET1300 vs EN1100 and ER850: which one to choose?

The real differences between the ET1300 and the closest Exide models:

ModelCapacityCold cranking (EN)Dimensions (mm)Weight
Exide ET1300 (this one)180 Ah900 A513 × 223 × 22349.7 kg
Exide EN1100180 Ah1,000 A513 × 223 × 22342.8 kg
Exide ER850180 Ah1,000 A513 × 223 × 22346.1 kg
  • Exide EN1100: the same capacity, 100 A more cranking power, the same dimensions.
  • Exide ER850: the same capacity, 100 A more cranking power, the same dimensions.

What it means that the ET1300 is lead-acid

The ET1300 is a conventional lead-acid battery, with plates immersed in liquid electrolyte. In cars without energy management, the ET1300 needs no special registration: just connect it.

What to look at before buying the ET1300

  • The ET1300 needs 513 × 223 × 223 mm of space: measure it with the hold-down clamp in place.
  • With 180 Ah, the ET1300 replaces an original battery of that capacity or slightly less.
  • Cold cranking: 900 A (EN), equal to or higher than the original.

Exide ET1300 codes and part numbers

Look for any of these ET1300 codes on your current battery or in the manufacturer's catalogue:

Commercial referenceET1300
EAN3661024035880
Not to be confused withExide ES1300 (120 Ah, 750 A, positive terminal on the right), Exide ET1600 (230 Ah, 1,100 A)

Frequently asked questions about the Exide ET1300

Exide ET1300 or EN1100?

Compared with the ET1300, the Exide EN1100 has 100 A more cranking power. If your current battery says 1,000 A or more, choose the EN1100; if it says 900 A or less, the ET1300 is enough. Both measure 513 × 223 × 223 mm, so they fit the same tray.

How much does the Exide ET1300 weigh?

The ET1300 weighs 49.7 kg. For reference, the Exide EN1100 (180 Ah) weighs 42.8 kg.

Which battery is equivalent to the Exide ET1300?

With the same dimensions, polarity and similar capacity you have the Varta LFD180, Varta LED190 and Varta LA170. As the ET1300 is a conventional battery, an EFB or AGM of the same size also works.

Which charger does the Exide ET1300 need?

An automatic lead-acid charger with cut-off or maintenance mode, rated at 10 to 20% of its capacity in amps. If it is a vented type, check the electrolyte level and top up only with distilled water.

Keep comparing: alternatives to the ET1300

Reviews

This product has no reviews yet. If you own it, tell us how it has gone: it will help whoever is looking at it now.

Loading...
Back to top