Exide ES650 · Boat battery 12V 56Ah 410A
Reference: BOL-EXIDE-ES650 · EAN 3661024035842
Exide ES650: boat battery with 12 V, 56 Ah and 410 A cold cranking current, case size L3 (278 × 175 × 190 mm), with the positive terminal on the right.
- Voltage
- 12V
- Capacity
- 56Ah
- Cold cranking amps (EN)
- 410A
- Technology
- GEL
- Dimensions (L × W × H)
- 278 × 175 × 190 mm
- Polarity
- Positive terminal on the right
VAT included. The exact shipping cost is shown in the cart before you pay.
PayPal, bank transfer or cash on delivery, always over an encrypted connection.
For Spain, Portugal, France, Germany, Italy, Belgium and the Netherlands you see the exact cost before paying. For the rest of Europe we send you a shipping quote, with no obligation.
If it does not fit, you have 14 days from delivery to return it unused.
The Exide ES650 at a glance
The Exide ES650 is a battery for boats: engine starting or on-board service, depending on its design, with resistance to damp and hull vibration. With 56 Ah, the ES650 suits boats that had a battery of that capacity.
The ES650 belongs to the Exide EXIDE MARINA GEL range. See all Exide batteries
Equivalents and alternatives to the Exide ES650
We have no other battery with exactly the dimensions and polarity of the ES650. Browse the rest of our marine and boat batteries to compare close options.
Exide ES650 vs ES450
What sets the ES650 apart from its neighbours in the Exide range:
| Model | Capacity | Cold cranking (EN) | Dimensions (mm) | Positive | Weight |
|---|---|---|---|---|---|
| Exide ES650 (this one) | 56 Ah | 410 A | 278 × 175 × 190 | right | 20.8 kg |
| Exide ES450 | 40 Ah | 280 A | 207 × 175 × 175 | right | 14.2 kg |
- Exide ES450: 16 Ah less, 130 A less cranking power, a different case (207 × 175 × 175 mm).
What it means that the ES650 is GEL
The ES650 is a gel battery: the electrolyte is immobilised in silica gel. The ES650 handles repeated deep discharges well, its strong point compared with an AGM.
Check this before ordering the Exide ES650
- The ES650 needs 278 × 175 × 190 mm of space (European case size L3): measure it with the hold-down clamp in place.
- With the terminals facing you, the positive terminal of the ES650 is on the right.
- Your current battery should say about 56 Ah; a little more is also fine.
- The ES650 delivers 410 A cold cranking (EN standard); do not go below what your original battery states.
Part numbers and codes for the Exide ES650
Look for any of these ES650 codes on your current battery or in the manufacturer's catalogue:
| Commercial reference | ES650 |
|---|---|
| EAN | 3661024035842 |
| Case size (EN) | L3 |
| Not to be confused with | Exide ES450 (40 Ah, 280 A), Exide ES950 (85 Ah, 450 A, positive terminal on the left), Exide EZ650 (75 Ah, 750 A, positive terminal on the left) |
Frequently asked questions about the Exide ES650
ES650 or ES450: which one suits me?
Compared with the ES650, the Exide ES450 has 16 Ah less and 130 A less cranking power. The ES650 cranks harder; the ES450 is only a good option if your original battery says 280 A or less. Mind the space: the ES450 measures 207 × 175 × 175 mm.
How much does the Exide ES650 weigh?
20.8 kg, with 56 Ah of capacity. For reference, the Exide ES450 (40 Ah) weighs 14.2 kg.
What case size is the Exide ES650?
Case size L3: 278 × 175 × 190 mm. The ES650 fits any standard L3 battery tray.
Which side is the positive terminal on the Exide ES650?
On the ES650, the positive terminal is on the right with the terminals facing you: compare it with your current battery, because with reversed polarity the cables will not reach.
Which charger does the Exide ES650 need?
A charger with a GEL mode not exceeding 14.1-14.4 V. Charging it with a conventional lead-acid profile damages it through overcharging.
Other options if you are unsure about the ES650
- Other marine and boat batteries
- More Exide models
- Exide ES290 · 25 Ah, 150 A, 166×175×125 mm
Reviews
This product has no reviews yet. If you own it, tell us how it has gone: it will help whoever is looking at it now.