Exide

Exide EB14L-B2 · Motorcycle battery 12V 14Ah 145A

Reference: BOL-EXIDE-EB14L-B2 · EAN 3661024033428

Exide EB14L-B2: motorcycle battery with 12 V, 14 Ah and 145 A cold cranking current, measuring 135 × 90 × 165 mm, with the positive terminal on the right. Need the positive terminal on the left? The same battery is the Exide EB14-A2.

Exide EB14L-B2 · Motorcycle battery 12V 14Ah 145A – main view
Voltage
12V
Capacity
14Ah
Cold cranking amps (EN)
145A
Technology
Lead-acid
Dimensions (L × W × H)
135 × 90 × 165 mm
Polarity
Positive terminal on the right
€59.54
Tax included

VAT included. The exact shipping cost is shown in the cart before you pay.

Share
Secure payment
PayPal, bank transfer or cash on delivery, always over an encrypted connection. Shipping with no surprises
For Spain, Portugal, France, Germany, Italy, Belgium and the Netherlands you see the exact cost before paying. For the rest of Europe we send you a shipping quote, with no obligation. 14 days to return your order
If it does not fit, you have 14 days from delivery to return it unused.

Does it fit your vehicle? Check by number plate or VIN

Enter your number plate or chassis number (VIN): we check whether this battery is compatible with your vehicle.

Where the Exide EB14L-B2 fits

The Exide EB14L-B2 is a motorcycle starter battery: compact, vibration-resistant and with just the right power to turn the starter motor and feed the electronics. It is worth keeping the EB14L-B2 on a maintenance charger if the bike is laid up over winter.

At 14 Ah it goes into large-capacity motorcycles, adventure bikes, customs and quads. The EB14L-B2 belongs to the Exide EXIDE MOTORCYCLE CONVENTIONAL 12V range. See all Exide batteries

Exide EB14L-B2 codes and part numbers

The EB14L-B2 is listed under these codes on labels, in garages and in catalogues:

Commercial referenceEB14L-B2
JIS codeYB14L-B2, 12N14-3B, SYB14L-B2
EAN3661024033428
Terminal typeM08
Not to be confused withExide EB14-B2 (14 Ah, 145 A, positive terminal on the left)

Equivalents and alternatives to the Exide EB14L-B2

Same dimensions and polarity as the EB14L-B2, with similar capacity and cranking power; as a conventional battery, the EB14L-B2 can also be replaced by an EFB or AGM of the same size if you want more cycles.

ModelTechnologyCapacityCold cranking (EN)Dimensions (mm)
Exide EB14L-A2Lead-acid14 Ah145 A135 × 90 × 165

Exide EB14L-B2 vs 12N14-3A, EB14-A2 and EB10L-A2

What sets the EB14L-B2 apart from its neighbours in the Exide range:

ModelCapacityCold cranking (EN)Dimensions (mm)PositiveWeight
Exide EB14L-B2 (this one)14 Ah145 A135 × 90 × 165right4.6 kg
Exide 12N14-3A14 Ah130 A135 × 90 × 165right4.6 kg
Exide EB14-A214 Ah145 A135 × 90 × 165left4.6 kg
Exide EB10L-A211 Ah130 A135 × 90 × 145right4.1 kg
Exide EB10L-B11 Ah130 A135 × 90 × 145right4.1 kg
Exide AGM12-1412 Ah210 A135 × 90 × 165right4.8 kg
  • Exide 12N14-3A: the same capacity, 15 A less cranking power, the same dimensions.
  • The Exide EB14-A2 is the same battery with the positive terminal on the other side: choose it if your current battery has the positive terminal on the left.
  • Exide EB10L-A2: 3 Ah less, 15 A less cranking power, a different height (145 mm instead of 165 mm). It is the option if your battery tray cannot take the 165 mm height of the EB14L-B2.
  • Exide EB10L-B: 3 Ah less, 15 A less cranking power, a different height (145 mm instead of 165 mm). It is the option if your battery tray cannot take the 165 mm height of the EB14L-B2.
  • Exide AGM12-14: 2 Ah less, 65 A more cranking power, the same dimensions, AGM technology.

Before ordering the EB14L-B2, check this

  • Measure the space: the EB14L-B2 takes up 135 × 90 × 165 mm.
  • The EB14L-B2 has the positive terminal on the right: compare it with your current battery.
  • Your current battery should say about 14 Ah; a little more is also fine.
  • The EB14L-B2 delivers 145 A cold cranking (EN standard); do not go below what your original battery states.

Frequently asked questions about the Exide EB14L-B2

Exide EB14L-B2 or 12N14-3A?

Compared with the EB14L-B2, the Exide 12N14-3A has 15 A less cranking power. The EB14L-B2 cranks harder; the 12N14-3A is only a good option if your original battery says 130 A or less. Both measure 135 × 90 × 165 mm, so they fit the same tray.

What is the difference between the Exide EB14L-B2 and the EB14-A2?

They are the same battery with the terminals swapped: positive terminal on the right on the EB14L-B2, positive terminal on the left on the EB14-A2. Look at your current battery with the terminals facing you and pick the one that matches.

Exide EB14L-B2 or EB10L-A2/EB10L-B: what changes?

Mainly the height: the EB14L-B2 is 165 mm tall and the Exide EB10L-A2 145 mm, with the same length and width. In capacity and cranking power, the EB10L-A2 offers 11 Ah and 130 A against 14 Ah and 145 A. The Exide EB10L-B is 145 mm tall, with 11 Ah and 130 A. Before choosing between the EB14L-B2 and the EB10L-A2, measure the free height of the battery compartment with the cover or bonnet closed.

How much does the Exide EB14L-B2 weigh?

The EB14L-B2 weighs 4.6 kg. For reference, the Exide 12N14-3A (14 Ah) weighs 4.6 kg.

Which battery is equivalent to the Exide EB14L-B2?

With the same dimensions, polarity and similar capacity you have the Exide EB14L-A2. As the EB14L-B2 is a conventional battery, an EFB or AGM of the same size also works.

Does the Exide EB14L-B2 come charged and ready to fit?

Sealed AGM and gel batteries leave the factory charged and ready. Conventional ones with a separate acid pack are activated when filled and should be charged before fitting.

Inside the EB14L-B2: lead-acid technology

The EB14L-B2 is a conventional lead-acid battery, with plates immersed in liquid electrolyte. Avoid leaving them discharged, as they sulphate, and charge them with a charger that cuts off or switches to maintenance when finished.

Keep comparing: alternatives to the EB14L-B2

Reviews

This product has no reviews yet. If you own it, tell us how it has gone: it will help whoever is looking at it now.

Back to top