Exide E50-N18L-A · Motorcycle battery 12V 20Ah 260A
Reference: BOL-EXIDE-E50-N18L-A · EAN 3661024033664
Exide E50-N18L-A: motorcycle battery with 12 V, 20 Ah and 260 A cold cranking current, measuring 205 × 90 × 165 mm, with the positive terminal on the right.
- Voltage
- 12V
- Capacity
- 20Ah
- Cold cranking amps (EN)
- 260A
- Technology
- Lead-acid
- Dimensions (L × W × H)
- 205 × 90 × 165 mm
- Polarity
- Positive terminal on the right
VAT included. The exact shipping cost is shown in the cart before you pay.
PayPal, bank transfer or cash on delivery, always over an encrypted connection.
For Spain, Portugal, France, Germany, Italy, Belgium and the Netherlands you see the exact cost before paying. For the rest of Europe we send you a shipping quote, with no obligation.
If it does not fit, you have 14 days from delivery to return it unused.
Does it fit your vehicle? Check by number plate or VIN
Enter your number plate or chassis number (VIN): we check whether this battery is compatible with your vehicle.
The Exide E50-N18L-A at a glance
The Exide E50-N18L-A is a motorcycle starter battery: compact, vibration-resistant and with just the right power to turn the starter motor and feed the electronics. It is worth keeping the E50-N18L-A on a maintenance charger if the bike is laid up over winter.
At 20 Ah it goes into large-capacity motorcycles, adventure bikes, customs and quads. The E50-N18L-A belongs to the Exide EXIDE MOTORCYCLE CONVENTIONAL 12V range. See all Exide batteries
Part numbers and codes for the Exide E50-N18L-A
The E50-N18L-A is listed under these codes on labels, in garages and in catalogues:
| Commercial reference | E50-N18L-A |
|---|---|
| JIS code | Y50-N18L-A, 12N18-3, 12N18-3-1, 12N18-3A, Y50-N18L-A2, Y50-N18L-A3 |
| EAN | 3661024033664 |
| Terminal type | M07 |
Equivalents and alternatives to the Exide E50-N18L-A
Batteries that fit the E50-N18L-A's tray with the same polarity; besides other conventional batteries, an EFB or AGM of this size is a valid upgrade for the E50-N18L-A.
| Model | Technology | Capacity | Cold cranking (EN) | Dimensions (mm) |
|---|---|---|---|---|
| Varta SY50-N18L-AT | Lead-acid | 20 Ah | 260 A | 205 × 90 × 162 |
| Fulbat F50-N18L-A / 12N18-3A | Lead-acid | 21.1 Ah | 260 A | 205 × 90 × 162 |
| Fulbat F50-N18L-A3 | Lead-acid | 21.1 Ah | 260 A | 205 × 90 × 162 |
| Varta Y50-N18L-A | Lead-acid | 20 Ah | 260 A | 207 × 92 × 164 |
| Exide E50-N18L-A3 | Lead-acid | 20 Ah | 260 A | 205 × 90 × 165 |
Exide E50-N18L-A vs AGM12-23 and ETX24HL-BS: differences
What sets the E50-N18L-A apart from its neighbours in the Exide range:
| Model | Capacity | Cold cranking (EN) | Dimensions (mm) | Positive | Weight |
|---|---|---|---|---|---|
| Exide E50-N18L-A (this one) | 20 Ah | 260 A | 205 × 90 × 165 | right | 6.6 kg |
| Exide AGM12-23 | 21 Ah | 350 A | 205 × 90 × 165 | right | 7 kg |
| Exide ETX24HL-BS | 21 Ah | 350 A | 205 × 90 × 165 | right | 5.8 kg |
- Exide AGM12-23: 1 Ah more, 90 A more cranking power, the same dimensions, AGM technology.
- Exide ETX24HL-BS: 1 Ah more, 90 A more cranking power, the same dimensions, AGM technology.
Before ordering the E50-N18L-A, check this
- Length, width and height of the E50-N18L-A: 205 × 90 × 165 mm.
- With the terminals facing you, the positive terminal of the E50-N18L-A is on the right.
- Your current battery should say about 20 Ah; a little more is also fine.
- Cold cranking: 260 A (EN), equal to or higher than the original.
Frequently asked questions about the Exide E50-N18L-A
E50-N18L-A or AGM12-23: which one suits me?
Compared with the E50-N18L-A, the Exide AGM12-23 has 1 Ah more, 90 A more cranking power and AGM technology. If your current battery says 350 A or more, choose the AGM12-23; if it says 260 A or less, the E50-N18L-A is enough. Both measure 205 × 90 × 165 mm, so they fit the same tray.
How much does the Exide E50-N18L-A weigh?
6.6 kg, with 20 Ah of capacity. For reference, the Exide AGM12-23 (21 Ah) weighs 7 kg.
Which battery is equivalent to the Exide E50-N18L-A?
With the same dimensions, polarity and similar capacity you have the Varta SY50-N18L-AT, Fulbat F50-N18L-A / 12N18-3A and Fulbat F50-N18L-A3. As the E50-N18L-A is a conventional battery, an EFB or AGM of the same size also works.
Which side is the positive terminal on the Exide E50-N18L-A?
On the E50-N18L-A, the positive terminal is on the right with the terminals facing you: compare it with your current battery, because with reversed polarity the cables will not reach.
Which charger does the Exide E50-N18L-A need?
An automatic lead-acid charger with cut-off or maintenance mode, rated at 10 to 20% of its capacity in amps. If it is a vented type, check the electrolyte level and top up only with distilled water.
Inside the E50-N18L-A: lead-acid technology
The E50-N18L-A is a conventional lead-acid battery, with plates immersed in liquid electrolyte. Avoid leaving them discharged, as they sulphate, and charge them with a charger that cuts off or switches to maintenance when finished.
Keep comparing: alternatives to the E50-N18L-A
- Other motorcycle batteries
- More Exide models
- Varta SY50-N18L-AT · 20 Ah, 260 A, 205×90×162 mm
- Fulbat F50-N18L-A / 12N18-3A · 21.1 Ah, 260 A, 205×90×162 mm
Reviews
This product has no reviews yet. If you own it, tell us how it has gone: it will help whoever is looking at it now.